Just picked up a 1976 Prindle 16 in fantastic shape...but completely disassembled. I am looking at the holes for the previous mast hound, and they do not match up with the new one I picked up. I want to make sure it is mounted in the right place on the mast, and was wondering if anyone had a measurement from the mast base to the bottom of the mast hound...I am sure I will have many other questions to come.
Thanks for your help,
Ty G Westfall
Replacing Mast Hound on Prindle 16
-
- Rank: Lubber
- Registered: Aug 20, 2012
- Last visit: Aug 22, 2012
- Posts: 2
Posted: Aug 21, 2012 - 11:36 AM
-
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Aug 21, 2012 - 02:04 PM
Be sure to plug the unused holes with silicone during assembly.
You want that mast watertight when you capsize.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Aug 21, 2012 - 03:16 PM
You might consider plugging them a with rivet as well as silicone.
Edited by Quarath on Aug 21, 2012 - 03:17 PM.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Mate
- Registered: May 09, 2009
- Last visit: Aug 14, 2024
- Posts: 686
Posted: Aug 21, 2012 - 04:58 PM
On my '83 mast it is 225 3/4" from the bottom of the base casting to the bottom of the hound.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Aug 22, 2012 - 09:42 AM
I measured same....
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
-- -
- Rank: Lubber
- Registered: Aug 20, 2012
- Last visit: Aug 22, 2012
- Posts: 2
Posted: Aug 22, 2012 - 06:53 PM
Thanks a lot guys...I appreciate the help. I used to sail an old Alcort Catfish that I fully restored, so this is quite a jump up for me!
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.