P16 beams, H18 beams, random Nacra beams, cut up P16 mast
Supercat front beam inserts, H16 tillers, H16 booms, H14 booms, H16 side rails, H16/15 lower castings
Edited by DanBerger on Sep 07, 2012 - 03:29 PM.
It's recycle time again!
-
- Rank: Mate
- Registered: Oct 02, 2002
- Last visit: Aug 13, 2020
- Posts: 214
Posted: Sep 07, 2012 - 03:25 PM
Beer money:
P16 beams, H18 beams, random Nacra beams, cut up P16 mast
Supercat front beam inserts, H16 tillers, H16 booms, H14 booms, H16 side rails, H16/15 lower castings
Edited by DanBerger on Sep 07, 2012 - 03:29 PM. -
- Rank: Mate
- Registered: Apr 24, 2011
- Last visit: Mar 20, 2018
- Posts: 177
Posted: Sep 07, 2012 - 03:42 PM
cat trax?
--
-Zach
-- -
- Rank: Mate
- Registered: May 29, 2011
- Last visit: Mar 13, 2016
- Posts: 332
Posted: Sep 07, 2012 - 04:12 PM
the h16 upper castings are no good? -
- Rank: Lubber
- Registered: Apr 11, 2012
- Last visit: Oct 12, 2012
- Posts: 53
Posted: Sep 07, 2012 - 05:54 PM
I need a H21 SE boom spar if you have something that would work. It's a bit longer than the H18, 110" -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Sep 07, 2012 - 06:10 PM
I have a H-14 mast section. It's 2 1/2 x 3 1/2" but that won't ship UPS. Pete -
- Rank: Lubber
- Registered: Apr 11, 2012
- Last visit: Oct 12, 2012
- Posts: 53
Posted: Sep 07, 2012 - 07:55 PM
A H14 mast section is the same as the G-Cat 5.0 front spar and boom but the H21 and H18 booms are that rectangular tubing. -
- Rank: Mate
- Registered: Oct 02, 2002
- Last visit: Aug 13, 2020
- Posts: 214
Posted: Sep 10, 2012 - 07:11 AM
That was 466 pounds, for a grand total of 4575 pounds of dead cat stuff I have recycled. It's adding up! And I didn't recycle the cat tracks, they were just there.
The upper castings were all the old style and I still have like 20 sitting on my deck. I still have a huge tub of lower ones, too.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.