I restored a 1979 Hobie 14 on a budget. I traded some buffing work on the customers center console fishing boat for the Hobie. The hulls were 80% soft and it took about 3 1/2 Gal Resin and 400 holes to stiffen it up. I always liked the easy rigging/ righting of the 14 although I used to sail Hobie 16 and Prindle 16 as well. I sailed it in large surf in FL and it held up. (See Catamaran Beauty and Art for Pics) I am 57 and have some health problems and it was exceptionally hard on me since the rachet didn't work and it was missing the cleat on the lower mainsheet block. I am interested in buying a cheap 4-1 lower mainsheet block or even better a Harken 5-1 block. We used a 5-1 system when I raced them in my 20s but now with a 4-1 purchase I last about 30 minutes in 20 MPH in the swells.
I also have some injection tips I used while following Quick & Dirty Hull repair from this site. I will post them in a coming article. Here is one, Hobbie Lobby has a paint called Krylon Short Cuts Turquoise #SCS-101 which practically matches the original Hobie Blue color for $3.27 per 3 oz. can. With internet coupon you can get it 40% off. The beauty of this is if it scratches the gel below shows almost no difference.
Good Sailing to all,
David
Edited by sailrider on Nov 25, 2012 - 10:09 PM.
--
David
Hobie 14 (Tsunami)
Valdosta, GA
--
Anyone have a Hobie 14 4-1 Mainsheet Block
-
- Rank: Lubber
- Registered: Dec 16, 2010
- Last visit: May 02, 2014
- Posts: 11
Posted: Nov 25, 2012 - 07:35 PM
-
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Nov 26, 2012 - 05:05 PM
If you ordeer today, you can get 25% off already inexpensive blocks at
http://Nautos-USA.com
92137 - TRIPLE FIXED WITH ALUMINUM CAM AND BECKET- SAILBOAT HARDWARE-BLOCKS
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Lubber
- Registered: Dec 16, 2010
- Last visit: May 02, 2014
- Posts: 11
Posted: Nov 26, 2012 - 09:37 PM
Thanks, but I was really looking for some used blocks that were less expensive. I only have about $300-$400 in the entire boat and trailer.
--
David
Hobie 14 (Tsunami)
Valdosta, GA
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Nov 29, 2012 - 01:31 AM
Check with Pete Begle, here, he probably has a set. He usually runs a bunch of ads here under "parts"(in the classifieds tab above)
I think he has left for the Baja, not back til Christmas, so he might be slow to reply.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Nov 29, 2012 - 09:03 AM
I think I have one in the shop, I will send you a pm a little later.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Lubber
- Registered: Dec 16, 2010
- Last visit: May 02, 2014
- Posts: 11
Posted: Dec 03, 2012 - 09:50 PM
Thanks,
I appreciate the help. I will check out Pete Begle and call or PM bacho tomorrow. I would also consider or Hobie , Prindle, Nacra or any brand 5-1 blocks from someone parting out a boat. Actually, all I really need is the cleat and side swivels for the lower block that I have. I could probably do without the rachet.
Thank you,
David
--
David
Hobie 14 (Tsunami)
Valdosta, GA
-- -
- Rank: Mate
- Registered: Sep 29, 2012
- Last visit: Jan 10, 2018
- Posts: 441
Posted: Dec 05, 2012 - 12:21 PM
David, e-mail sent.....
-
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Dec 06, 2012 - 04:06 AM
I was unable to put my hands on one.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Lubber
- Registered: Dec 16, 2010
- Last visit: May 02, 2014
- Posts: 11
Posted: Dec 07, 2012 - 06:55 PM
Thanks Everyone,
Still looking for a while for just what I want. The idea setup would be a low profile 5-1 so I could carry more mast rake.
Good Sailing,
David
--
David
Hobie 14 (Tsunami)
Valdosta, GA
--
