I searched through the forums and noticed one thread where a poster indicated he uses a larger main sheet on his boat. I am looking for recommendations on main sheet size. I believe the larger the line the better as it will be more comfortable on the hands. However, I know that my Jib blocks will not accommodate the next size up from Hobie recommended 5/16.
3/8 spun Dacron is the recommended main sheet in the Hobie catalog.
I have an 07 H16 with the Harken 6:1 low profile blocks. Will a larger size line fit in these blocks? Will it work in the traveler (i have plenty of smaller line as I am replacing a 5/16 main sheet installed by the previous owner or the rental company that sold to him).
If so, any recommendations on size and material type, and where to buy?
Thanks
--
Ted
Hobie 16
South Carolina Lake sailing
--
Main sheet recommendation H16
-
- Rank: Mate
- Registered: May 31, 2011
- Last visit: Dec 17, 2023
- Posts: 126
Posted: Mar 05, 2013 - 06:02 PM
-
- Rank: Mate
- Registered: Jul 20, 2011
- Last visit: Apr 07, 2019
- Posts: 323
Posted: Mar 05, 2013 - 06:48 PM
I bought several size lines on here and all are VERY well made, high strength, very low stretch and feel good on bare hands. Great prices too!
http://www.mountainsports.com/MSmain.asp?Option=List&Cat=60&Sub1=60&ShowImages=Yes
Edited by fxloop on Mar 05, 2013 - 06:48 PM.
--
Tim Grover
1996 Hobie Miracle 20
Two Hobie 14's
1983 G-Cat Restored
Memphis TN / North Mississippi
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Mar 05, 2013 - 08:33 PM
Go with nicer line instead of bigger line. 5/16" salsa or phd work just fine for mainsheets. Don't go above 3/8"
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Mar 06, 2013 - 05:05 AM
Go with the thinner line 5/16. It will pay out quicker, and that is what you want when you are sheeting out in a puff. It may prevent a capsize. -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Mar 06, 2013 - 05:22 AM
For the main on a H 16 I prefer a 3/8 line and I always use trophy braid, it is so much easier on the hands. It will be replaced a little more often but if you reverse it about mid way through the life you can a lot of years out of it.
I personally do not like much of the more modern lines, they are too abrasive, I have trophy on all my sheets on both boats. For halyard etc, I do not care, I get what is best, as is small and strong. I just prefer the soft stuff on the sheets. JMHO, YMMV. Ricardo
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Mar 06, 2013 - 07:09 AM
I like Dyneema Blended Single Braids
I LOVE robline racing sheet for main a spin (not jib as it is too light to snap the line out of the blocks)
it is very soft on the hands, low stretch, doesn't retain water
drawback - fuzzy (sticks to velcro on gloves) and more expensive than other lines
also great is Salsa and swiftcord -
- Rank: Lubber
- Registered: Jun 22, 2011
- Last visit: Aug 26, 2013
- Posts: 58
Posted: Mar 06, 2013 - 07:49 AM
I totally agree regarding the jib sheet. What are you using in place of the robline for the jib sheet? Mine is a pain in the arse to snap out of the blocks when sheeted in hard.
Thanks,
Jimmy
--
-------------------------------------------
1983 Nacra 5.0 Sail #10
Dallas, Texas area
-------------------------------------------
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Mar 06, 2013 - 08:15 AM
standard xls Polyester Double Braid -
- Rank: Lubber
- Registered: Jul 08, 2005
- Last visit: Aug 26, 2023
- Posts: 97
Posted: Mar 06, 2013 - 08:40 AM
this is what my son has on his 16 w/ Harken 6:1
Sta-Set Polyester Yacht Braid 3/8
Edited by CatsailorMike on Mar 06, 2013 - 08:40 AM.
--
Mike Conway
H16
Hilton, NY
-- -
- Rank: Mate
- Registered: Aug 01, 2002
- Last visit: Nov 26, 2024
- Posts: 426
Posted: Mar 06, 2013 - 11:42 AM
The 3/8" shouldn't be too hard on the hands with a 6:1 if it's a decent line. I'm fairly certain that you won't be happy with the performance of anything larger......won't run through blocks well. I've been using 3/8" Sta-Set for years, and it's a good line for the price. However, in an effort to get even better performance, I'm trying some 5/16" (not sure of brand/type) for the first time this season. I do have concerns about the grip on windy days when I have to cleat and uncleat a lot.....we'll see how it goes.
--
Jerome Vaughan
Hobie 16
Clinton, Mississippi
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Mar 06, 2013 - 01:44 PM
MaxiBraid Plus - Yale
http://www.apsltd.com/c-1…maxibraid-plus-yale.aspx
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Aug 01, 2002
- Last visit: Nov 26, 2024
- Posts: 426
Posted: Mar 08, 2013 - 06:09 PM
Thanks, Ron. I didn't really need to know 'cause I have full faith in my line "dealer." Sucks that I haven't even had a chance to try it out, though....maybe tomorrow!
--
Jerome Vaughan
Hobie 16
Clinton, Mississippi
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.