I noticed a Dent in the mast a couple days ago while replacing the sheaves in the mast head. It's about 8" wide and about 1/2" depressed on the right had side, 2" in from the main leech track, and about 18" below the mast head. I'm not 100% sure how it happened, but my guess is a car tire while it was on the ground last year next to the shop. It was pretty out of the way and would have required some off roading, but it's the only thing that makes sense.
My question is, does anyone think this will make the mast unsafe? It's a good 2'+ above the standing rigging attachment. Will the force from the main and halyard be an issue? I may try and take off the the mast head to see if I can work it out from the inside, but I'm not sure, aside from aesthetics, if it would help.
Any suggestions?
I'll try and get some pictures up tomorrow.
Edited by solsailer18 on Mar 17, 2013 - 05:06 PM.
--
Jeremy Hales
1974 SOLCAT 18
Salem, OR
--
Dent in mast, safety or performance issue?
-
- Rank: Lubber
- Registered: Dec 18, 2010
- Last visit: Aug 27, 2013
- Posts: 56
Posted: Mar 17, 2013 - 07:03 PM
-
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Mar 18, 2013 - 05:22 AM
Sail it.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Lubber
- Registered: Jul 20, 2012
- Last visit: May 31, 2013
- Posts: 29
Posted: Mar 18, 2013 - 12:07 PM
my first boat had a huge dent in the mast... The mast eventually broke because of a minor accident
but not at the location of the dent. And considering where your dent is, I think you would be pretty safe to sail it.
--
Proud owner of a Mystère 6.0
Ottawa, Ontario, Canada
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Mar 18, 2013 - 01:39 PM
A 1974 Solcat, SAIL IT LIKE YOU STOLE IT.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Mar 18, 2013 - 02:49 PM
^^
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Lubber
- Registered: Jul 08, 2005
- Last visit: Aug 26, 2023
- Posts: 97
Posted: Mar 18, 2013 - 03:57 PM
my son sailed his h16 for about 8 years with a slight bend. no problems.... go for it.....
--
Mike Conway
H16
Hilton, NY
-- -
- Rank: Mate
- Registered: Aug 27, 2011
- Last visit: Jun 15, 2015
- Posts: 153
Posted: Mar 18, 2013 - 05:35 PM
The dent if I understand correctly runs along the mast, not across that's not a problem at all in my book. In addition SolCat mast were made from ticker aluminum extrussions than Hobbies and Nacras. It is heavy duty mast and there is noting to worry about. Sail it.
--
Adam Bartos
Nacra 5.0
SolCat 18 (sold)
Lake Zurich, IL
-- -
- Rank: Lubber
- Registered: Dec 18, 2010
- Last visit: Aug 27, 2013
- Posts: 56
Posted: Mar 18, 2013 - 10:41 PM
Thanks for the replies! Makes me feel a lot better with all the "go for it" responses. It'll get it's first dip since restoration this April. Fingers crossed that a dent in the mast is my only issue.
--
Jeremy Hales
1974 SOLCAT 18
Salem, OR
--
