• drmanhattan
  
  

  • Rank: Lubber
  • Registered: Mar 31, 2013
  • Last visit: May 31, 2013
  • Posts: 8

  Posted: Apr 08, 2013 - 02:44 PM

  Hello all,
  Very excited to have acquired a new to me H16! Im keen to start sailing as a novice and have a few questions Im hoping you all can help answer! pictures included!
  
  First:
  Is the amount of corrosion on the boom acceptable? is there an easy fix, or just sail it?
  
  
  
  
  Second:
  On the mast, the cheek block (which I assume is for the jib halyard) is shot... The pulley has completely deteriorated as you can see. Any recommended fix besides riveting a new block? Is it true you can use the pin above the pulley instead?
  
  
  Last but not least:
  I have a bunch of wire Im not sure where or what is goes to. I will number the pics for ease of identifying.
  
  Pic 1
  
  
  Pic 2
  
  
  pic 3
  
  
  pic 4
  
  
  I really appreciate it and sorry for the long post!

  • 
  •  
• DamonLinkous
  
  

  • Rank: Administrator
  • Registered: Jul 19, 2001
  • Last visit: Nov 15, 2024
  • Posts: 3446

  Posted: Apr 08, 2013 - 02:57 PM

  drmanhattan

  Hello all,
  Very excited to have acquired a new to me H16! Im keen to start sailing as a novice and have a few questions Im hoping you all can help answer! pictures included!

  
  
  Welcome to TheBeachcats.com, I'm sure our Hobie 16 experts will show up soon.
  
  Do you know what year your Hobie is? There are numbers etched in the fiberglass at the stern beside the rudder castings that tell the model and year of manufacture.
  
  What area will you be sailing? Might find some locals here to help in person.
  
  Have you assembled the boat and raised the mast yet? Sounds like you haven't, so may not have all the pieces, luckily Hobie 16's have less parts to lose than most beachcats.
  
  Lastly, that boom looks nasty, but can be used. I don't know how a black anodized boom got that bad unless it was stored with that end in a tub of salt water.
  
  --
  Damon Linkous
  1992 Hobie 18
  Memphis, TN
  
  How To Create Your Signature
  
  How To Create Your Own Cool Avatar
  
  How To Display Pictures In The Forums.
  --

  • 
  •  
• drmanhattan
  
  

  • Rank: Lubber
  • Registered: Mar 31, 2013
  • Last visit: May 31, 2013
  • Posts: 8

  Posted: Apr 08, 2013 - 03:07 PM

  Thanks for the welcome, Damon.
  
  I was told it is an 86 by the hobie dealer. The number etched is: CCMB3303J68 so Im not sure how 86 was determined though...
  
  I have not raised the mast as I haven't got a main or jib yet... looking at the intensity sails...
  
  Located in San Antonio, TX.

  • 
  •  
• DamonLinkous
  
  

  • Rank: Administrator
  • Registered: Jul 19, 2001
  • Last visit: Nov 15, 2024
  • Posts: 3446

  Posted: Apr 08, 2013 - 03:32 PM

  drmanhattan

  
  I was told it is an 86 by the hobie dealer. The number etched is: CCMB3303J68 so Im not sure how 86 was determined though...
  

  
  Could be an '86, but that's not enough numbers. Should be 12 digits like
  CCM B XXXX J686
  where the first four X's are the serial build number and the last four digits show the model year and manufacture date. The J could indicate October, so if you HIN (Hull ID Number) ended in J686 it would be a 1986 H16 build in October 1986. Check both hulls to see if they match.
  
  More info on HIN http://www.boatsafe.com/nauticalknowhow/hin.htm
  
  --
  Damon Linkous
  1992 Hobie 18
  Memphis, TN
  
  How To Create Your Signature
  
  How To Create Your Own Cool Avatar
  
  How To Display Pictures In The Forums.
  --

  • 
  •  
• optikid
  
  

  • Rank: Mate
  • Registered: May 29, 2011
  • Last visit: Mar 13, 2016
  • Posts: 332

  Posted: Apr 08, 2013 - 06:02 PM

  i would say just sail with the boomthe way it is, but i dont know for sure. just use the block the way it is you dont really need the wheel, mine is like that and works find. pic 1-bow bridals pic 2 jib halyard. i cant tell what the other one are.

  • 
  •  
• nacra55
  
  

  • Rank: Mate
  • Registered: Nov 02, 2004
  • Last visit: Aug 07, 2023
  • Posts: 626

  Posted: Apr 08, 2013 - 07:09 PM

  First Sail it
  
  Second use it without and rig 3:1
  
  Pic 1 Jib Halyard
  Pic 2 Bridle wires
  Pic 3 Fore Stay
  Pic 4 Shrouds
  
  --
  Ron
  Nacra F18
  Reservoir Sailing Assn.
  Brandon, Mississippi
  --

  • 
  •  
• windadict
  
  

  • Rank: Mate
  • Registered: Aug 27, 2011
  • Last visit: Jun 15, 2015
  • Posts: 153

  Posted: Apr 08, 2013 - 07:39 PM

  Anodizing on the boom is already corroded so you don't have to worry about scratching. You may do light sanding to make it look better. No problem with using it as is.
  
  Re to block - I removed left over chunkes of that pulley and used only the pin on my SolCat, it worked. No big deal to use as is. The replacement also doesn't cost that much eaiter. Check Murrays.
  Happy sailing
  
  --
  Adam Bartos
  Nacra 5.0
  SolCat 18 (sold)
  Lake Zurich, IL
  --

  • 
  •  
• the-renovator
  
  

  • Rank: Mate
  • Registered: Sep 29, 2012
  • Last visit: Jan 10, 2018
  • Posts: 441

  Posted: Apr 08, 2013 - 08:06 PM

  90'S H16 rigging with a very young Matt Miller
  
  http://www.youtube.com/watch?v=jxctIJVOAd0
  
  Basics
  
  http://www.waldorfs.com/HobieRiggingBasics.pdf

  • 
  •  
• the-renovator
  
  

  • Rank: Mate
  • Registered: Sep 29, 2012
  • Last visit: Jan 10, 2018
  • Posts: 441

  Posted: Apr 08, 2013 - 08:13 PM

  Ummm! priority side note, never, ever, never, if at all possible, walk on the hulls, this is the major cause of delamination on catamarans, keep all kids, friends, wifes, hot babes off the hulls.............

  • 
  •  
• drmanhattan
  
  

  • Rank: Lubber
  • Registered: Mar 31, 2013
  • Last visit: May 31, 2013
  • Posts: 8

  Posted: Apr 08, 2013 - 10:00 PM

  Really appreciate everyone's help. I'll sail the damn thing then!
  
  

  nacra55

  First Sail it
  
  Second use it without and rig 3:1
  

  
  I apologize but could you elaborate a bit more on the 3:1 and how the jib halyard (pic 1) and the forestay work together?
  
  Thank you!

  • 
  •  
• pbegle
  
  

  • Rank: Mate
  • Registered: Mar 12, 2003
  • Last visit: Feb 19, 2021
  • Posts: 879

  Posted: Apr 08, 2013 - 10:35 PM

  Put a wire wheel in your electric drill And clean off all that corrision. Pete

  • 
  •  
• the-renovator
  
  

  • Rank: Mate
  • Registered: Sep 29, 2012
  • Last visit: Jan 10, 2018
  • Posts: 441

  Posted: Apr 09, 2013 - 12:12 PM

  On the bottom of the jib halyard is a block with a becket.......
  
  
  
  .....should be 1/4" line tied off on the becket, then the line loops through the sheave on the block. In the youtube video above at 11.49, Matt reaches up and grabs the line at the becket and pulls out a loop which he then lengthens and hooks the bottom of the loop around the cheek-block on the mast. This gives you 3:1 purchase or pulling power on the halyard.
  
  The forestay of the H16 is there to help you step and secure the mast, but if you look at the jib closely, you will notice that there is a stay sewn into a pocket on the luff, once you raise the jib and crank on that 3:1 down-haul, that stay in the jib luff pocket become the forestay, the original (fore) stay becomes loose, as per the Youtube video above at around 12.55.
  
  Make sense Dr........
  
  
  
  Edited by the-renovator on Apr 09, 2013 - 12:18 PM.

  • 
  •  
• the-renovator
  
  

  • Rank: Mate
  • Registered: Sep 29, 2012
  • Last visit: Jan 10, 2018
  • Posts: 441

  Posted: Apr 09, 2013 - 12:53 PM

  I forgot to mention that the other block on your jib halyard.......
  
  
  
  ....is connected to the mast tang using a short stay sometimes referred to as a "pigtail".

  • 
  •  
•  
•  

Users on-line

• idkerik,
• lmoas

This list is based on users active over the last 60 minutes.