Hey guys, I need a little help here. I just bought a H18SX mast and a Nacra spinnaker pole.
The mast has 2 harken down haul swivel cam cleats mounted at the mast base on a SS bracket what is this for? Is it for the down haul? If so why 2? Is this after market?
The spinnaker pole has a goose neck on it and I am looking for options to mount it to my cross beam.
I have a H18 with SX wings and the extra mounting plates for the cross beams.
Not the best photos but I think you can see what I am asking about.
Edited by shipchips1 on Apr 11, 2013 - 11:01 AM.
--
Jim
New Orleans
'83 H18 SX mods 2013 -
'65 Lavey Craft 2005 -
'69 Cal 25 1997 - 2001
'80 P16 1980 - 1996
--
New SX mast and Nacra spinnaker pole
-
- Rank: Mate
- Registered: Nov 15, 2011
- Last visit: Jul 27, 2016
- Posts: 121
-
- Rank: Mate
- Registered: Jun 26, 2009
- Last visit: Mar 20, 2015
- Posts: 150
There are two swivel cam cleats so the downhaul can be adjusted by the crew while on the wire on either side. -
- Rank: Mate
- Registered: Nov 15, 2011
- Last visit: Jul 27, 2016
- Posts: 121
Do you mean while on the trapeze?
--
Jim
New Orleans
'83 H18 SX mods 2013 -
'65 Lavey Craft 2005 -
'69 Cal 25 1997 - 2001
'80 P16 1980 - 1996
-- -
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Most nacra systems I have seen use a plate with a stud sticking out of it riveted to the beam. The pole has a plastic insert stuck into the pole that fits around the stud. You can attache the pole anyway you like, just keep in mind that you want to keep it simple to install and take apart.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Mate
- Registered: Jun 26, 2009
- Last visit: Mar 20, 2015
- Posts: 150
Yes. Downhaul is a big power adjuster used often when racing especially bouy racing where every bit counts so it has to be handy. -
- Rank: Mate
- Registered: Nov 15, 2011
- Last visit: Jul 27, 2016
- Posts: 121
Hey thanks!
Where should I look for mounting ideas for my spin pole? I am trying to invision what the original owner of the spin pole did and I just cant see it.
Any recommendations? I don't mind doing modifications.
Edited by shipchips1 on Apr 11, 2013 - 06:41 PM.
--
Jim
New Orleans
'83 H18 SX mods 2013 -
'65 Lavey Craft 2005 -
'69 Cal 25 1997 - 2001
'80 P16 1980 - 1996
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
This is how the nacra pole mounts.
http://www.murrays.com/mm…e=56-9626&Category_Code=
http://www.murrays.com/mm…-9625&Category_Code=C-NF
What diameter is your pole?
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
The Hobie pole mounts like a Hobie boom since the front cross bar is a curved piece of mast you need to get the mast portion of the goose neck for a boom. HTH, Richard.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Nov 15, 2011
- Last visit: Jul 27, 2016
- Posts: 121
Thanks guys! That will work great!
Jim
--
Jim
New Orleans
'83 H18 SX mods 2013 -
'65 Lavey Craft 2005 -
'69 Cal 25 1997 - 2001
'80 P16 1980 - 1996
--