• catmodding
  
  

  • Rank: Mate
  • Registered: Aug 11, 2010
  • Last visit: Mar 19, 2018
  • Posts: 424

  Posted: Apr 11, 2013 - 03:55 PM

  So, called the yard several times, made an appointment, drove
  over a 100 km ,one way,to pick up trailer and so on....
  Are you sure it can be reached this time?
  Arrived this early afternoon to pick up the T..
  And yes, they moved a couple of motorboats to release my T ..
  " you can move it between the cradles, there's some room."
  So, what about the mast ? its about 10 meters long ?
  " oh, we didn't think about the mast"
  Next week, they promised, I can get the T out of that shed.
  Stupid motorboat-people !!!!
  And yes, it was raining.
  
  
  
  
  
  
  
  Keep you posted, André
  
  --
  Tornado (80's Reg White)
  Prindle 18-2 (sold)
  Dart 16 (hired and hooked)
  13 mtr steel cutter (sold)
  Etap 22, unsinkable sailing pocket cruiser.
  
  Amsterdam, the Netherlands
  --

  • 
  •  
• nautilus
  
  

  • Rank: Lubber
  • Registered: Feb 12, 2012
  • Last visit: Mar 12, 2014
  • Posts: 9

  Posted: Apr 13, 2013 - 04:52 AM

  het boot sit goed uit jonge,wel gedaan! I see some AHPC rudders too, I think from a Taipan 5.7.Any sails in the kit , how old and who is the maker please?

  • 
  •  
• catmodding
  
  

  • Rank: Mate
  • Registered: Aug 11, 2010
  • Last visit: Mar 19, 2018
  • Posts: 424

  Posted: Apr 14, 2013 - 07:09 PM

  nautilus

  het boot sit goed uit jonge,wel gedaan! I see some AHPC rudders too, I think from a Taipan 5.7.Any sails in the kit , how old and who is the maker please?

  
  
  Translation; " the boat looks good, well done" .Thank you, Nautilus
  There are some sails with the boat, but not use-able . Already bought a Ullman cuben fibre
  fathead and a pentex jib, still have a new F18 spi. Will use it the first season.
  
  André
  
  
  
  Edited by catmodding on Apr 16, 2013 - 12:16 AM.
  
  --
  Tornado (80's Reg White)
  Prindle 18-2 (sold)
  Dart 16 (hired and hooked)
  13 mtr steel cutter (sold)
  Etap 22, unsinkable sailing pocket cruiser.
  
  Amsterdam, the Netherlands
  --

  • 
  •  
• catmodding
  
  

  • Rank: Mate
  • Registered: Aug 11, 2010
  • Last visit: Mar 19, 2018
  • Posts: 424

  Posted: Apr 22, 2013 - 03:02 PM

  Yes !!
  Tornado is at the club, almost 8 weeks of waiting, calling and wishing the
  ice would go away. Today I picked up the T.
  
  Finally free
  
  
  On the road to club I found the T a little to big for the P18-2 trailer,
  so decided to add a safety flag
  
  
  Now the T is home..
  
  
  On the downside, discovered a weak spot in the starboard hull, have to
  fix it before assembly, bummer.
  
  regards André
  
  --
  Tornado (80's Reg White)
  Prindle 18-2 (sold)
  Dart 16 (hired and hooked)
  13 mtr steel cutter (sold)
  Etap 22, unsinkable sailing pocket cruiser.
  
  Amsterdam, the Netherlands
  --

  • 
  •  
• pbegle
  
  

  • Rank: Mate
  • Registered: Mar 12, 2003
  • Last visit: Feb 19, 2021
  • Posts: 879

  Posted: Apr 22, 2013 - 04:30 PM

  Having two wood Tornados that are on their 5th summer with us, where exactly is the weak spot? Pete

  • 
  •  
• catmodding
  
  

  • Rank: Mate
  • Registered: Aug 11, 2010
  • Last visit: Mar 19, 2018
  • Posts: 424

  Posted: Apr 22, 2013 - 05:18 PM

  pbegle

  Having two wood Tornados that are on their 5th summer with us, where exactly is the weak spot? Pete

  
  
  The weak spot is on the starboard hull, on the inner side, just under the bridle tang and forward.
  Its down on the waterline .
  Looks like a collision repair rather then structural.
  
  André
  
  --
  Tornado (80's Reg White)
  Prindle 18-2 (sold)
  Dart 16 (hired and hooked)
  13 mtr steel cutter (sold)
  Etap 22, unsinkable sailing pocket cruiser.
  
  Amsterdam, the Netherlands
  --

  • 
  •  
• catmodding
  
  

  • Rank: Mate
  • Registered: Aug 11, 2010
  • Last visit: Mar 19, 2018
  • Posts: 424

  Posted: May 29, 2013 - 05:50 PM

  Hi,
  
  Started on the T this week, found a marina where I can sand the hulls in
  a environmental conscious way. (new EU rules)
  Here's where she sits.
  
  
  And here's my environmental friendly setup, bought a new sander and a
  all round vacuum cleaner wich connects to the sander fine.
  Actually, it works great, don't have to wear a mask and my clothes were
  clean after the first run.
  
  
  Have to be careful not to sand of the glass-cloth on the outside layer,
  so switched from 80 to a 100 grain. The hull after 4 hours of sanding:
  
  
  Started working on the "worse hull" first, and find that the weak spot is a
  bit larger then expected.
  
  
  Gonna start a topic in the technical section on this item.
  
  And just now the forecast changed again, so.......
  
  
  Keep you posted, André
  
  
  
  Edited by catmodding on May 30, 2013 - 01:16 AM.
  
  --
  Tornado (80's Reg White)
  Prindle 18-2 (sold)
  Dart 16 (hired and hooked)
  13 mtr steel cutter (sold)
  Etap 22, unsinkable sailing pocket cruiser.
  
  Amsterdam, the Netherlands
  --

  • 
  •  
• klozhald
  
  

  • Rank: Chief
  • Registered: Apr 19, 2011
  • Last visit: Dec 10, 2024
  • Posts: 1461

  Posted: May 29, 2013 - 05:54 PM

  Progress!
  That rocks, André!!
  
  --
  Sheet In!
  Bob
  _/)_____/)_/)____/)____/)_____/)/)__________/)__
  Prindle 18-2 #244 "Wakizashi"
  Prindle 16 #3690 "Pegasus" Sold (sigh)
  AZ Multihull Fleet 42 member
  (Way) Past Commodore of Prindle Fleet 14
  Arizona, USA
  --

  • 
  •  
•  
•  

Users on-line

• 0 users

This list is based on users active over the last 60 minutes.