Well I sold my P19 last year and regretted it so I found a well priced 5.7 on CL and snapped it up.
Looking forward to sailing the boat this summer on Tahoe.
Anything I should know about 5.7's before fixing it up and sailing it?
Cheers
Al
I'm Back... with a Nacra 5.7 this time :)
-
- Rank: Lubber
- Registered: Jun 16, 2011
- Last visit: Jul 02, 2015
- Posts: 64
Posted: Apr 15, 2013 - 03:26 AM
-
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Apr 15, 2013 - 09:34 AM
that was your boat on fb?...sweet!
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Apr 15, 2013 - 09:46 AM
try to keep your mouth closed when grinning from ear to ear and laughing cause it is so much fun.
you can get a fly in your mouth if your not careful
congrats and enjoy.
-
- Rank: Lubber
- Registered: Jun 16, 2011
- Last visit: Jul 02, 2015
- Posts: 64
Posted: Apr 15, 2013 - 09:58 AM
Yeah I was tagged in that image of it at the gas station on the trailer -
- Rank: Lubber
- Registered: Aug 20, 2006
- Last visit: Apr 30, 2015
- Posts: 74
Posted: Apr 15, 2013 - 02:22 PM
I miss my 5.7 They are a great boat, easy to sail and right when you get on your side. I recommend the square top mylar sails over the dacron any day. ( I had Ian at Elloit Pattison make me a really nice bi color set of sails) They have the pattern down pat as they were the factory sail maker back then. They are far superior over the dacron and give better tach and jibbing over dacron. They also perform better in light air. The mast ball should be replaced every year even though they look fine. I had a 1.5 yr old ball exlode while going under the Verranzano Bridge during a Statue of Liberty Race a few years back. The rudder shock cords are manageable but still a pain to deal with. I kept a spare set of aluminum pins for the gudgeons and replaced them mid season every year. They wear kinda fast. Like most cats it really helps to move forward under light wind and she will speed right up. They love to be nose heavy. No fear when stuffing a hull as they seem to get spit back out and I never could pitchpole the boat. Good luck with her,, Jenna
--
2007 Nacra F18 Infusion
www.fleet250.org
Facebook: Sandy Hook Bay Catamaran Club
-- -
- Rank: Lubber
- Registered: Jun 16, 2011
- Last visit: Jul 02, 2015
- Posts: 64
Posted: Apr 15, 2013 - 04:24 PM
Thanks for the tips Jenna,
Shopping list is for a new dolphin striker mast pin, mast ball, standing rigging and elbow grease so far..
Hull needs a little TLC but nothing I I can't fix easily. -
- Rank: Lubber
- Registered: Aug 20, 2006
- Last visit: Apr 30, 2015
- Posts: 74
Posted: Apr 18, 2013 - 08:34 AM
Your welcome,, just becareful the the mast pin and ball are matched they make two thread patterns just to mess wiff our heads.
--
2007 Nacra F18 Infusion
www.fleet250.org
Facebook: Sandy Hook Bay Catamaran Club
-- -
- Rank: Lubber
- Registered: May 26, 2011
- Last visit: Dec 16, 2014
- Posts: 81
Posted: May 12, 2013 - 08:16 PM
5.7 Comrades:
I am working on retro fitting and rigging my 5.7.
New shrouds and forestay mast ball ordered, running rigging just about done.
I am measuring the shock cord on the rudders, looks like 3/16". Is there any other characteristic? What do you use? It's pretty old so I wanted to check with the pros in case it mine had shrunk. Are there any other tricks to this part of the system I should know about? There is not much detail in the manual.
Thanks
--
Mooched Beachcats in the past
Time to try ownership with Nacra 5.7
Port Clinton, Lake Erie Islands, Ohio
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: May 12, 2013 - 08:51 PM
3/8 inch shock cord on the rudders is what I used on the 5.5, same rudder system.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: May 12, 2013 - 09:49 PM
Awesome boat! Good choice. :)
Shouldn't be much of an adjustment from your P19. The 5.7 should be a little easier to sail and a little tamer than the P19, it will probably feel like a vacation. I know my 5.7 just rails on one hull, it gets up and just likes to sit there all day. If you have questions or need parts be sure to ask.
Regards,
Dave
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Aug 27, 2011
- Last visit: Jun 15, 2015
- Posts: 153
Posted: May 12, 2013 - 11:22 PM
That should be 5/16" and you run double inside the tubing. You can use 3/8" but I don't think you can fit 2 of them inside.
--
Adam Bartos
Nacra 5.0
SolCat 18 (sold)
Lake Zurich, IL
-- -
- Rank: Mate
- Registered: Aug 27, 2011
- Last visit: Jun 15, 2015
- Posts: 153
Posted: May 12, 2013 - 11:52 PM
Take a look at this thread to get all the info you need ".Nacra Rudder System, Pivmatics and Bungee Setup".
N5.0 and N5.7 use the same rudder system.
Edited by windadict on May 12, 2013 - 11:52 PM.
--
Adam Bartos
Nacra 5.0
SolCat 18 (sold)
Lake Zurich, IL
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: May 13, 2013 - 01:41 AM
I stand corrected 5/16 is the correct size.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Lubber
- Registered: Aug 20, 2006
- Last visit: Apr 30, 2015
- Posts: 74
Posted: May 13, 2013 - 09:09 AM
Yes that would be a work and the tighter you set them the better. The problem is the strectch you need to make it work when setting it up. The 5/16 cord will work easier thou. The 3/16 is hard to get a full season out of.They become a annual maintenance event if your boat is in the sun uncovered alot I am restoring an A-Cat currently with the same system. I thought I had gotten away from that with the F18 uggh.
Edited by JennaMeyer on May 13, 2013 - 10:38 AM.
--
2007 Nacra F18 Infusion
www.fleet250.org
Facebook: Sandy Hook Bay Catamaran Club
-- -
- Rank: Lubber
- Registered: Sep 01, 2012
- Last visit: Dec 10, 2013
- Posts: 54
Posted: May 13, 2013 - 01:00 PM
just did the rudders on my 5.7 with 4' of 5/16" (cheap stuff from department store) this setup was NOT able to support the weight of the rudders, going to try a better quality 5/16" as well as 3/8" (originally had 3/8" when i bought it).
--
Nacra 5.7
Falcon Lake Manitoba
Canada
-- -
- Rank: Lubber
- Registered: May 26, 2011
- Last visit: Dec 16, 2014
- Posts: 81
Posted: May 13, 2013 - 05:10 PM
You Guys and Gals are great!
Man am I glad I found you. Do any of you make house calls?
Thanks for the quick, helpful responses.
Scott
--
Mooched Beachcats in the past
Time to try ownership with Nacra 5.7
Port Clinton, Lake Erie Islands, Ohio
-- -
- Rank: Mate
- Registered: Apr 15, 2011
- Last visit: Jul 04, 2019
- Posts: 287
Posted: May 13, 2013 - 07:08 PM
Just my opinion, which may not be worth anything, but expecting the shock cord to hold the rudders propped up is a little far fetched. I think the original purpose was just to have enough strength to pop them up once you uncleat them. (and once you uncleat them, the bungees pop them up and they basically float)
Edited by matt922 on May 13, 2013 - 07:10 PM. -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: May 13, 2013 - 09:14 PM
Not so. Rudders should stand up like they just saw couple bikini SUPers. On the lake today on 5.8 with only 1/4" old shock cord & minute we pulled tube end of shock cord, they stood up. Needed for backing boat around on beach. Pete -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
Posted: May 13, 2013 - 10:32 PM
I'm still working on the technical folder for the Nacra rudders and will post when finished. Matt, please, you're way off base.
--
Philip
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: May 14, 2013 - 06:26 AM
Not far fetched, there are several photos in the galleries showing the rudders at 1 O'clock. As some of the posters say, it is just a matter of bungee diameter & preload.
That being said, you may not want your rudders to pop up. In my case, the water suddenly gets shallow 50' from the dock. I need to be able to get enough clearance that they don't bang on the bottom, but still require a steering force to be able to round up. Our prevailing wind means I need to be able to execute a 180* turn in a confined space. If my rudders popped clear, I would lose that ability, so I rig them to perform as you mentioned, only coming to a trail position.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
