inter 17 r rudder cross bar
-
- Rank: Lubber
- Registered: Aug 30, 2006
- Last visit: May 06, 2013
- Posts: 4
Posted: May 03, 2013 - 02:38 PM
my rudder cross bar disappeared on my 2002 inter 17r anyone know the length before i cut a new one? -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: May 03, 2013 - 06:55 PM
I'll try to get you the length shortly. I've got mine around here somewhere.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Lubber
- Registered: Aug 30, 2006
- Last visit: May 06, 2013
- Posts: 4
Posted: May 06, 2013 - 03:01 PM
thanks, -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: May 06, 2013 - 05:40 PM
Each boat will likely be slightly different. Better to align your rudders and then measure the distance between the tiller bars.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: May 06, 2013 - 10:14 PM
Nah, they have enough play with the tendons that the standard length works fine. I just forgot, then went over there (place w/ my boat) and forgot again tonight. I may walk back over there before bed and measure it. I may forget a third time. I'll get you the measurement though.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: May 08, 2013 - 05:56 PM
75.75" long, 0.995 diameter, .075" wall thickness
--
Rob
OKC
Pile of Nacra parts..
--
