Think these hulls worth saving?

DamonLinkous

Rank: Administrator

Registered: Jul 19, 2001

Last visit: Nov 15, 2024

Posts: 3446
Posted: May 09, 2013 - 08:36 PM

I know we talk about the old crappy boats way too much...

But here's another one. The decks forward of the front beam is pretty crunchy, and I've never seen a port installed like this one on the Port beam. Kind of off-center. Lot's of people added inspection ports to their Hobie 16's, the recommended location was between the pylons, but some like the easier access in front of the beams, but they were always installed in the center of the decks as far as I've seen.

Worth messing with? This is 1976 model, interestingly it has a really nice rudder system with straight-tube adjustable castings, Hobie 20 quick-connectors, and original EPO's. Tramp looks ok, and trailer is a really nice galvanized one.

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--
coastrat

Rank: Chief

Registered: Jul 16, 2009

Last visit: Oct 28, 2014

Posts: 1271
Posted: May 09, 2013 - 09:58 PM

drill baby fill!!!... 35$ 1 gallon bondo/3m resin, 2-3hrs tops for entire job...try to destroy it, i dare you! too many other good parts to not try, your not out much...even if you do a port patch/glass job.

--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
--