Addhesive backed marker tape for downhaul on the mast and outhaul on the boom.
Marks at half inch increments and UV stabilized.
Bought the one from Murray's and it faded and peeled off after a year.
http://www.murrays.com/mm…e=07-2082&Category_Code=
Anyone know of a good quality one about a foot long- would welcome metric as well?
Would prefer one that counted from the bottom up.
Edited by klozhald on May 30, 2013 - 06:57 PM.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
Dang hard to find...
-
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: May 30, 2013 - 06:50 PM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: May 31, 2013 - 05:17 AM
I used to get a set with every purchase from Magic Marine. They may sell them as well -
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
Posted: May 31, 2013 - 06:05 AM
I have a damn good sharpie and a ruler you can borrow...
--
FYC, Nacra 5.2 "Chris's Flyer" & Nacra Playcat & Farrier Tramp
Previously owned: Trac 14, H14, H16, H18, N5.0, G-cat 5.0
-- -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jun 01, 2013 - 12:43 AM
+1
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Jun 03, 2013 - 01:45 PM
That is what is under the current ruler tape. I used an industrial Sharpie and covered it with clear UV resistant tape but the tape came off and the markings bled out, so I am looking for a more serious solution. On my first try, grease pencil under tape actually lasted longer than the Sharpie.
Edited by klozhald on Jun 03, 2013 - 01:46 PM.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Jul 06, 2009
- Last visit: Nov 01, 2024
- Posts: 395
Posted: Jun 04, 2013 - 06:12 AM
oh, my bad. i forgot sharpie would bleed on aluminum. maybe use whiteout or a paint based marker
--
FYC, Nacra 5.2 "Chris's Flyer" & Nacra Playcat & Farrier Tramp
Previously owned: Trac 14, H14, H16, H18, N5.0, G-cat 5.0
-- -
- Rank: Lubber
- Registered: Jan 05, 2013
- Last visit: Sep 22, 2014
- Posts: 78
Posted: Jun 04, 2013 - 07:47 AM
Just go get a thin stainless steal Machinist Engineering ruler that are typically about 1/2" wide and 6" or 12" long. Cut to length desired and rivet it to the mast.
Here is a link to McMaster Carr which has several types available.
http://www.mcmaster.com/#rule-straightedges/=n1oct7
Edited by nacraflyer on Jun 04, 2013 - 05:53 AM.
--
Craig
Windrider Rave Hydrofoil
Nacra 5.2 Restored and heavily modified
Nacra 5.2 (one under restoration)
Nacra 5.7
Nacra 5.8NA
SoCal
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Jun 04, 2013 - 10:31 AM
Brilliant!
Many thanks!
Bob
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
