--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
--
Hobie 18 Daggerboard Repair
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 12, 2013 - 06:38 PM
If you have a Hobie 18 you'll probably recognize the situation right away.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Lubber
- Registered: Apr 10, 2013
- Last visit: Oct 25, 2015
- Posts: 94
Posted: Jun 12, 2013 - 06:43 PM
I would say the daggers now have a fine polish on the bottom edge -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 12, 2013 - 06:55 PM
The bottom edge is pretty much missing, and the gravel road produced a kind of rough finish.
By the way, that groove in the road was over 150 feet long.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jun 12, 2013 - 07:00 PM
I was going to say a rudder or the end of the mast. Last summer a guy towing a 16 passed us as we waited to pull onto the hiway. Every bump resulted in the trailer bouncing a bit, & the rudders contacting the pavement. By the time the light turned it was to late to catch him. I wondered what he said when he finally got to his cottage.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 12, 2013 - 07:07 PM
Two things make this particularly bad.
1. This is not the first time I've lost the tip off a daggerboard by not removing them when pulling the boat up the ramp.
2. Just ONE day before this I was advising another sailor that you MUST ALWAYS REMOVE DAGGERBOARDS BEFORE TRAILERING THE BOAT UP THE RAMP or they might fall down and leave a chalk mark the length of the concrete ramp. This time they made it onto the gravel road inside the sailing club before falling. So after the tip breaks off you get pieces of gravel wedged into the split open foam core.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jun 12, 2013 - 09:20 PM
It really does bite, especially when you know better. Errors have so many ways of creeping in, we get rushed because we want to look professional, & others are waiting for the ramp, we get tired, we're getting older & forget more.
Don't beat yourself up to much, a couple of years ago I agreed to deliver a Cat trailer I sold, 300km for a buyer. I got all the way there, & in the last 100 meters forgot about the Xbeams while crossing a small bridge into the parking lot. Tore the trailer all to Hell. He was nice enough to give me 1/4 of the price for the wreckage & the gas money we had agreed to.
It could also have been worse. Imagine there being a curb, & your boards fell just before that curb. New/used/fixed boards are easier/cheaper than hulls!!
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Apr 15, 2011
- Last visit: Jul 04, 2019
- Posts: 287
Posted: Jun 12, 2013 - 10:50 PM
Sometimes i get really angry when stuff like that happens, but then i just think about how much worse it would be if it were a brand new one... -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 13, 2013 - 12:24 AM
That's what happened here. I got the boat off the shore and onto the trailer in record time trying to do it during a lull between thunderstorms.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Aug 06, 2009
- Last visit: Jul 30, 2016
- Posts: 101
Posted: Jun 13, 2013 - 05:28 AM
ain't nobody perfect! s--t happens. if you wake up in the morning and it is a cloudless sunny day and you do not have a problem in the world you have died and gone to heaven , you are not on planet earth any more. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jun 13, 2013 - 06:55 AM
one time i forgot to tie up my centerboards and drove home
just as i crested the drawbridge i hit a little bump and both boards fell down into position.
I didn't hear them hit the metal grate of the bridge ... i smelled the burning epoxy (from behind me)
pulled over and had chewed off about 8" of each board... LIVE AND LEARN
(forgot to tie up my boards again last week... lucky they didn't drop down on the ride home -live and LEARN damnit) -
- Rank: Mate
- Registered: Jul 20, 2011
- Last visit: Apr 07, 2019
- Posts: 323
Posted: Jun 13, 2013 - 10:24 AM
Haha, that was me the day before, and I was there to witness the chalk line happen there in the gravel... Man that had to be a bummer.
Do ya have a spare to get ya on the water until you get that one fixed? Ill be down at the lake all weekend long weather permitting.
Tim
--
Tim Grover
1996 Hobie Miracle 20
Two Hobie 14's
1983 G-Cat Restored
Memphis TN / North Mississippi
-- -
- Rank: Lubber
- Registered: Sep 15, 2010
- Last visit: Jan 27, 2014
- Posts: 36
Posted: Jun 13, 2013 - 10:41 AM
Damon, it's time you look at a Nacra 5.0!
--
------------------------------------------------------------------
Marc C.
Cleveland, Ohio.
Current love: Nacra 5.0
Old loves: Int Laser, Int Europe, Int 470, Int 420, Vaurien
------------------------------------------------------------------
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 13, 2013 - 11:23 AM
I'd sink a 5.0, maybe a 5.7
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Jan 21, 2003
- Last visit: Feb 10, 2015
- Posts: 115
Posted: Jun 13, 2013 - 11:42 AM
I sense something in the Force, a daggerboard fix "how to"....
--
Jeff
Houston TX
1986 Hobie 18 Sail# 13031
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jun 13, 2013 - 01:46 PM
I think you would be very pleasantly surprised by the 5.7. I think you should just get one! What better way could there possibly be to spend a few bucks?
My skinny 172 lbs is not near enough to hold down the boat in any wind. I can fly a hull in 10mph, & have done just over 21mph both single, double trapped & 3 up. 3 up was my 120lb wife & a 185 lb friend on the wire, myself sitting on the upwind hull, foot braced against the traveler casting. We drove that 5.7 like a wild banshee for 10 miles, flying a hull, & often having to slip a bit of sheet, or steer to keep it shiny side up.
Simple to rig, no boards, clean tramp, light enough for one person to muscle around. You wouldn't have wings though.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Sep 29, 2012
- Last visit: Jan 10, 2018
- Posts: 441
Posted: Jun 13, 2013 - 03:35 PM
Get a P18 Damon.........
http://topeka.craigslist.org/boa/3835754330.html
I'll go get it for you and bring it down to Memphis.............
. we'll sail the heck out of it
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 13, 2013 - 03:49 PM
Oh man, nice bathtub ring.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jun 13, 2013 - 03:53 PM
Wire harness & lights $28 (Walmart), new white dacron jib $295, 1 1/2 hour sanding grounge off, 1/2 hour wax job, $25 footloop kit on gunwales & you're in for $1100. It's a steal! Pete -
- Rank: Mate
- Registered: Jul 16, 2002
- Last visit: Aug 18, 2020
- Posts: 126
Posted: Jun 19, 2013 - 10:48 PM
I guess I'll need to write up the story to go with the pictures ..................
Damon - this part may cost you a six pack of Dos Equis!!
--
Lee - On the BIG Lake in MS
Harstil Kaulua 31 - Current Project Boat
Cal 25 - What ? Time to freshen it up again??
MC Scow 16 (1 in the water and 1 parts/project) SOLD
Capri 22 - What do you mean you wont deliver it??
Chrysler Pirateer 13 - new addition to the fleet
-- -
- Rank: Mate
- Registered: Jul 20, 2011
- Last visit: Apr 07, 2019
- Posts: 323
Posted: Jun 19, 2013 - 10:58 PM
i'll donate a fav case of beer and future time to help Damon get that dagger board fixed... That 18SX is amazing... small donations?
Damon... Post your PayPal address? .... if fans of us cats send you $10-$20 ish cash, you're on the water ASAP :)
Edited by fxloop on Jun 20, 2013 - 07:21 AM.
