Hello
I need to connect my beams and mast of a prindle 18.2 ..
Who knows the correct way ?
A manual?
Thanks
Karel
Edited by karelr on Jun 14, 2013 - 12:01 AM.
prindle 18.2 -how to connect beams?
-
- Rank: Lubber
- Registered: Jun 12, 2013
- Last visit: Jun 19, 2013
- Posts: 6
Posted: Jun 14, 2013 - 12:00 AM
-
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Jun 14, 2013 - 12:19 AM
http://www.thebeachcats.c…ictures/?g2_itemId=35451
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Jun 14, 2013 - 12:20 AM
Karel,
Welcome to TheBeachcats.com!
There is a Prindle 18-2 assembly manual available here.
http://www.thebeachcats.c…ictures/?g2_itemId=35451
Hopefully that will clear things up. Did you get the boat disassembled? Where are you located?
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Lubber
- Registered: Jun 12, 2013
- Last visit: Jun 19, 2013
- Posts: 6
Posted: Jun 14, 2013 - 03:45 AM
Thanks for the manuel,
Yes it was disassembled,
In Belgium Sint-Idesbald www.kyc.be
Please I want to know how long the screw bolt need to be..
Thanks
Karel
Edited by karelr on Jun 14, 2013 - 03:47 AM. -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Jun 14, 2013 - 10:12 AM
this may help
http://www.thebeachcats.c…614640b753623e31216787bd
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jun 14, 2013 - 12:07 PM
Front beam bolts are 4 1/8" (x 2.54 for cm) long. I couldn't loosen rear bolts (slotted ones go inside for traveler clearance). Pete
