I just picked up a Gleason spinnaker sail.
The foot measures 12'5"
green side 20'
red side 21' 3"
Would this work on a Hobie 16?
The head has a swivel attached to it.
Other than a small mouse hole, the sail looks new.
--
Bill 404 21SE
--
Hobie 16 spinnaker
-
- Rank: Mate
- Registered: Aug 15, 2010
- Last visit: Oct 19, 2024
- Posts: 301
-
- Rank: Mate
- Registered: Aug 15, 2010
- Last visit: Oct 19, 2024
- Posts: 301
Could someone help me here with my spinnaker question?
--
Bill 404 21SE
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
HOBIE 16 ASYMMETRICAL
Luff 19.5ft (5943mm)
Foot 8.75ft (2666mm)
Leech 17.25ft (5257mm)
Area 128*ft2 (11892mm2)
http://sailritesails.com/ShowAd.aspx?id=5792&sourceid=2
Looks like the foot of your sail will be way too long -
- Rank: Lubber
- Registered: Apr 10, 2013
- Last visit: Oct 25, 2015
- Posts: 94
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
may be possible to use this, but you can also put wheels on your catamaran... wont help it sail better, but it's possible.
it is almost 2' too tall and 4' longer in the foot.
you would need to pre-bend your spin pole 2' down to get ANY luff tension. That would place your pole end in the water (i believe)
also you would need an extra long pole & you would probably have to place the blocks on the rear beam to make this work... since the foot is 33% longer than stock.
Edited by MN3 on Jun 20, 2013 - 08:22 AM. -
- Rank: Mate
- Registered: Aug 01, 2002
- Last visit: Sep 14, 2024
- Posts: 425
I'm guesssing those dimensions are for the old (Hobie USA?) spin. The one with the newer (Hobie Europe) kit is 15 m2.
Edited by rattlenhum on Jun 20, 2013 - 12:04 PM.
--
Jerome Vaughan
Hobie 16
Clinton, Mississippi
-- -
- Rank: Mate
- Registered: Aug 15, 2010
- Last visit: Oct 19, 2024
- Posts: 301
Users on-line
This list is based on users active over the last 60 minutes.