• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Jun 29, 2013 - 05:04 AM

  I've looked last night and this morning and apparently don't have very good searching skill. Could someone point me towards where to find an adapter to mount this on my round front beam? I'm wanting to mount them for jib sheets. I'm assuming what I'm looking for exists, seems like I've seen it.
  
  
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Jun 29, 2013 - 05:06 AM

  On a Supercat if that makes any difference
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
• shipchips1
  
  

  • Rank: Mate
  • Registered: Nov 15, 2011
  • Last visit: Jul 27, 2016
  • Posts: 121

  Posted: Jun 29, 2013 - 05:25 AM

  I have one brand new, 45 + shipping if you want it.
  
  I have some used ones for 10 + shipping if interested
  
  
  
  Edited by shipchips1 on Jun 29, 2013 - 05:26 AM.
  
  --
  Jim
  New Orleans
  
  '83 H18 SX mods 2013 -
  '65 Lavey Craft 2005 -
  '69 Cal 25 1997 - 2001
  '80 P16 1980 - 1996
  --

  • 
  •  
• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Jun 29, 2013 - 05:27 AM

  Point me at how to mount it on my rounded beam and we can talk!!
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
• **unknown user**
  
  

  • Rank: Lubber
  • Registered: Jan 01, 2024
  • Last visit: Jun 29, 2013
  • Posts: 14

  Posted: Jun 29, 2013 - 05:31 AM

  Hi from Ger. send Your Email to me,I make a pic. from this Harken part on a P 19 ,
  
  Reg,Adriaan

  • 
  •  
• pknapp66
  
  

  • Rank: Mate
  • Registered: May 09, 2009
  • Last visit: Aug 14, 2024
  • Posts: 686

  Posted: Jun 29, 2013 - 06:43 AM

  Not sure this is exactly what you need.
  
  http://www.murrays.com/mm…1-0109&Category_Code=C-J
  
  http://www.murrays.com/mm…e=01-0112&Category_Code=
  
  http://www.murrays.com/mm…e=01-8011&Category_Code=
  
  
  
  Edited by pknapp66 on Jun 29, 2013 - 06:47 AM.
  
  --
  Pete Knapp
  Schodack landing,NY
  Goodall Viper,AHPC Viper,Nacra I20
  --

  • 
  •  
• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Jun 29, 2013 - 07:46 AM

  Pete,
  
  I think that's what I need! Thanks
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
• captedteach
  
  

  • Rank: Mate
  • Registered: Jul 16, 2002
  • Last visit: Aug 18, 2020
  • Posts: 126

  Posted: Jun 29, 2013 - 07:44 PM

  Tape 36 grit sand paper to beam - take a piece of Teak or other boat wood and slide back and forth on the paper In about 30-45 minutes you have the part you need
  
  --
  Lee - On the BIG Lake in MS
  
  Harstil Kaulua 31 - Current Project Boat
  Cal 25 - What ? Time to freshen it up again??
  MC Scow 16 (1 in the water and 1 parts/project) SOLD
  Capri 22 - What do you mean you wont deliver it??
  Chrysler Pirateer 13 - new addition to the fleet
  --

  • 
  •  
• lakewateree
  
  

  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Oct 24, 2024
  • Posts: 195

  Posted: Jun 30, 2013 - 06:35 PM

  Jim sent you a PM
  
  --
  Mac
  Midlands South Carolina
  AHPC Viper USA 366
  A Cat USA 366
  Super Cat 17
  --

  • 
  •  
•  
•  

Users on-line

• Shawn,
• jclarkdawe

This list is based on users active over the last 60 minutes.