The bulls eye fairlead on the mainsheet swivel base assembly just split during a race and went overboard. The mounting plate is still there; looks like it would take 8-32 screws on a 1" center... but there's a panhead screw swivel that sits proud of the mounting plate (so the fairlead must have had clearance for the swivel bolt head). I've found fairleads that look like they might fit the hole pattern, but now way to know from pictures if theres clearance for a swivel; my guess is that this is somewhat special.
Can anyone direct me to a part number? I don't want to replace the entire swivel base if I don't have to
--
***********************
Pairajacks
1985 Nacra 5.2
Corvallis Oregon
************************
--
Nacra 5.2 - Mainsheet swivel base fairlead broke. Anyone know part number?
-
- Rank: Lubber
- Registered: May 11, 2011
- Last visit: May 31, 2019
- Posts: 37
Posted: Jul 12, 2013 - 12:15 AM
-
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
Posted: Jul 12, 2013 - 09:06 AM
Are you referring to the "traveler"?
--
Philip
-- -
- Rank: Lubber
- Registered: Jul 12, 2012
- Last visit: Jul 12, 2013
- Posts: 1
Posted: Jul 12, 2013 - 09:30 AM
I will be very interested to hear about this also. I have a generic replacement bullseye "balanced" on top of the panhead screw now. It don't look right :-/ -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Jul 12, 2013 - 09:53 AM
http://www.murrays.com/mm…323&Category_Code=C-MO-F
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jul 12, 2013 - 10:28 PM
If what you are referring to is this;
,
I have a total assembly off an old 5.2 we wrecked.
As Ron pointed out, the easy solution is to just buy the fairlead & screw on.
Edited by Edchris177 on Jul 12, 2013 - 10:29 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Jul 15, 2013 - 05:56 PM
Can you post a photo of what is left on your cat so we can help you match the part you need? There are lots of variables here.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Jul 16, 2013 - 05:11 PM
Go to West Marine buy the fairlead and mount it on. The same thing happen to me. I had to redrill some holes. That was 5 years ago. Haven't looked back.
--
Nacra 5.2
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.