--
Dave R.
Grand Haven, MI
'84 Prindle 16
--
Latest recommendation on replacement trampoline - Prindle 16
-
- Rank: Lubber
- Registered: May 11, 2009
- Last visit: Jul 18, 2022
- Posts: 29
Posted: Aug 01, 2013 - 03:10 PM
Anyone a resident expert on who is recommended for trampoline replacements?
--
Dave R.
Grand Haven, MI
'84 Prindle 16
-- -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
Posted: Aug 01, 2013 - 03:30 PM
You might want to try the search function.
--
Philip
-- -
- Rank: Mate
- Registered: Jul 20, 2011
- Last visit: Apr 07, 2019
- Posts: 323
Posted: Aug 01, 2013 - 04:08 PM
As I understand, Factory trampolines are the best. However, I love my one piece bias cut mesh tramp from SLO sails and canvas. Very well made and no lacing up the middle... Many pro sailors on here. Seems everyone likes something different. I guess It depends where you live, weather, vinyl/mesh ect.
Should be someone local to you that could replace yours for ya!
Tim
Edited by fxloop on Aug 01, 2013 - 04:10 PM.
--
Tim Grover
1996 Hobie Miracle 20
Two Hobie 14's
1983 G-Cat Restored
Memphis TN / North Mississippi
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Aug 01, 2013 - 06:02 PM
Your tramp is one piece and laces only in the back already.
The sides have tabs that go through the deck edges.
Because of the porthole cutouts, i don't know if they offer a bias cut one for the 16.
I have a tramp from SLO Sails as well and am happy with the workmanship.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Aug 02, 2013 - 05:12 AM
+1 for www.SLOSAILS.com -
- Rank: Lubber
- Registered: Jul 08, 2005
- Last visit: Aug 26, 2023
- Posts: 97
Posted: Aug 02, 2013 - 05:55 AM
a few folks in our club have had good luck with this place and i have gotten 2 jib snorkles from him for my h16 furling jib. not sure if he does prindle but he's got a bunch for hobies. my $.02 good luck
http://myworld.ebay.com/racedaytramp/
--
Mike Conway
H16
Hilton, NY
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Aug 02, 2013 - 06:49 AM
sunrise yacht makes the highest quality tramps i have seen
SLO was sent a tramp (by me) as a template and never returned the tramp, nor did the job, nor returned my calls or emails ... so i will never recommend them (do a search on this site for the full details) -
- Rank: Lubber
- Registered: May 11, 2009
- Last visit: Jul 18, 2022
- Posts: 29
Posted: Aug 11, 2013 - 08:52 PM
Well I tried race day tramps. I will let you know what I think once I have it installed.
--
Dave R.
Grand Haven, MI
'84 Prindle 16
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Aug 11, 2013 - 10:42 PM
Ordered half dozen tramps from SLO this year and they all came within a week or better & fit very well. Pete -
- Rank: Mate
- Registered: Aug 15, 2010
- Last visit: Oct 19, 2024
- Posts: 301
Posted: Aug 12, 2013 - 03:43 AM
I replaced both of my wing tramps and the boat tramp last year with Hobie made tramps and they are top notch. My original tramp ,'89 vintage lasted 23 years and still has some good life left in it. I found new one sitting on a store shelf and couldn't pass it up.
--
Bill 404 21SE
-- -
- Rank: Lubber
- Registered: Mar 01, 2012
- Last visit: Aug 27, 2013
- Posts: 22
Posted: Aug 12, 2013 - 10:53 AM
I just got a new tramp from Sunrise Yachts and have no complaints. http://www.multihullnets.com/Prices/Nets/StockBeachCat/bcSelect.aspx
--
Virginiasailor
Prindle 15
-- -
- Rank: Mate
- Registered: Jul 16, 2002
- Last visit: Aug 18, 2020
- Posts: 126
Posted: Aug 12, 2013 - 12:02 PM
I called Tampa Catamarans to get a quote since they advertise on here - I've now called twice and left a message both times and they have yet to call back. Since the last call to them, I have spoken with and emailed Andrew at SLO several times, gotten a quote for a new tramp and was mailed samples of material to chose from
--
Lee - On the BIG Lake in MS
Harstil Kaulua 31 - Current Project Boat
Cal 25 - What ? Time to freshen it up again??
MC Scow 16 (1 in the water and 1 parts/project) SOLD
Capri 22 - What do you mean you wont deliver it??
Chrysler Pirateer 13 - new addition to the fleet
-- -
- Rank: Lubber
- Registered: May 11, 2009
- Last visit: Jul 18, 2022
- Posts: 29
Posted: Aug 12, 2013 - 02:08 PM
For me, time was an issue and I needed a tramp shipped to Michigan in a week. That was going to be a squeeze for SLO.
Sunrise Yachts and Race Day both had tramps for a P-16 in stock and could ship right away. However, the Sunrise prices were around $400 shipped and the Race Day was $269.00 shipped. No issue with Sunrise, as many of you have pointed out they make very high quality tramps.
But I will gamble with Race Day this time. Ebay showed high satisfaction from previous buyers. I will be first to let you know if I made a mistake.
--
Dave R.
Grand Haven, MI
'84 Prindle 16
-- -
- Rank: Lubber
- Registered: Jul 31, 2013
- Last visit: Sep 27, 2013
- Posts: 25
Posted: Aug 14, 2013 - 07:57 AM
I have a P-16 with a slo trampoline on it. I can't say much for the long term durability because it's new, but it appears to be quality craftsmanship
--
Vince
Houston, TX
1982 prindle 16 - became a parts boat shortly after purchase. "The Crackling Hullflyer"
1984 prindle 16 - current boat "Blew By You"
-- -
- Rank: Lubber
- Registered: Dec 25, 2011
- Last visit: Sep 09, 2014
- Posts: 14
Posted: Mar 17, 2014 - 05:17 PM
Does Anyone know where I could find a Hobie Trampoline (boat and wings) for a Hobie 21SE? This is my first option. Baring that - is there any manufacturer out there that sells a factory replacement in heat welded vinyl?
--
Andy Gardner
Hobie 21SE "Lickity Split"
Cowan Lake Sailing Association
Foster, OH
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Mar 17, 2014 - 09:27 PM
An advertiser here at TheBeachcats.com has a nice product at a good price.
http://stores.tampacatamarans.com/
They have both the main and wing tramps.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Aug 22, 2011
- Last visit: Oct 10, 2018
- Posts: 187
Posted: Mar 18, 2014 - 10:15 AM
+1 more on SLO, I had some custom requests and they were very accommodating and knowledgeable. Workmanship is great. I don't know about the other guys though. I'm also very surprised with MN3's experience, they've been great in the past year that I've worked with them, I'm working with them on a new sail set right now.
--
Cesar (Cez) S.
Hobie 16 (had a few)
Nacra 5.2 "Hull Yeah"
Vectorworks XJ - A class (not named yet)
West Michigan (Grand Rapids/Holland Area)
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Mar 18, 2014 - 11:08 AM
I read MN3's truly tragic story here in TheBeachCats.
The local scuttlebutt in CA is that the Patriarch of the business (SLO) passed away without choosing or training a next in line. There was confusion and conflict for quite some time before things settled and the current staff came up to speed. I don't know where in that process MN3's order fell, but I have seen family battles over businesses stay ugly and self-destructive for years- some never recover. SLO is currently making quality tramps- I own one.
SLO owes MN3 a resolution, no matter what the situation was at the time.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Aug 22, 2011
- Last visit: Oct 10, 2018
- Posts: 187
Posted: Mar 18, 2014 - 03:15 PM
Agreed 100%
--
Cesar (Cez) S.
Hobie 16 (had a few)
Nacra 5.2 "Hull Yeah"
Vectorworks XJ - A class (not named yet)
West Michigan (Grand Rapids/Holland Area)
-- -
- Rank: Lubber
- Registered: Dec 25, 2011
- Last visit: Sep 09, 2014
- Posts: 14
Posted: Mar 19, 2014 - 05:01 PM
I went with the Sunrise Main and Wing tramps - should have them in a couple weeks. I'll report back once I've got them on the boat...
--
Andy Gardner
Hobie 21SE "Lickity Split"
Cowan Lake Sailing Association
Foster, OH
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.