Lots of soft and crunchy in the p15 I just picked up. black grease pencil outlines areas affected.
The last shot is from inside the inspection port or the port hull and on the right you can see the deformation of the layers separating. Has anybody repaired one from the inside out?
--
Rob Jones
1976 Yellow p-16 - parts is parts - hulls cut up
1978 Yellow p-16 - in good working order
1979 White p-15 - parts is parts - hulls cut up
1985 White p-15 - good working order
1982 White NACRA 5.8 - project boat.
1986 White p-16 - in good working order
1975 White Hobie 3.5 - PM me if you want it
--
p15 delamination estimates
-
- Rank: Lubber
- Registered: Jun 18, 2007
- Last visit: Aug 22, 2017
- Posts: 95
-
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
fill her up! start at the bottoms and work your way to the top. you have nothing to lose...mayby 35$ in resin.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
--