Anybody know the number of 5mm (3/16) torlon ball bearings that go in the Harken 22mm Non-Captive Bearing Small Boat Traveler Car that's commonly used on the Nacras? They are sold in packages of 20 but there are more than that.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
--
Harken 22mm Non-Captive Bearing Small Boat Traveler Car
-
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Aug 11, 2013 - 06:37 PM
-
- Rank: Mate
- Registered: Jan 25, 2004
- Last visit: Apr 06, 2021
- Posts: 267
Posted: Aug 11, 2013 - 07:55 PM
look here.
http://www.defender.com/p…avelers_QuickService.pdf
might you need this?
http://www.harken.com/pro…aspx?id=19070&taxid=1611
http://www.defender.com/p…311532|311533&id=1987423
j
--
Aquacat 12 (sold)...'87 Nacra 5.8 (sold)...'03 Nacra Inter18 (sold)
Venture 15 (sold)....'89 Nacra 5.8 (sold)...'91 Nacra 5.8NA (sold)
'99 Nacra Inter20 (sold)
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Aug 11, 2013 - 10:07 PM
Well, that helped, saved me from ordering the wrong size bearings.
Looks like they are 6mm not 5mm.
The bearings alone and the loader cost just as much as the kit.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Aug 12, 2013 - 05:37 AM
Yes, 1/4" for the SB Cars.
If you only need the bearings, they come 21 to a bag. At West Marine, I saw them last week for $10/bag.
If the car is only dirty, but the races are OK, you can take the end caps off & scrub everything out with a small toothbrush/paste.
You might already have the Loctite 242 in your workshop. It's the blue tube, (non permanent), don't use red, it can only be undone with the application of heat
That site,(Defender) that Arch quoted has the lowest prices I have found. Quite a few items,are actually sold for less than the advertised price. Apparently many manufacturers have lowest advertised price, which is what they show. When you go to checkout, it drops it to the actual price.
Edited by Edchris177 on Aug 12, 2013 - 05:45 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Aug 12, 2013 - 02:02 PM
APS has them priced at $46.03 but back ordered and I need to rebuild several H150 Cam Cleats. Could not find the parts at Defender and APS has them on back order in the quantities I need. May have to spend the extra to get them straight from Harken. The closest West is a 4 hour drive, one way.
Thought about getting the bearings for the H150's aand Traveler from http://www.mcmaster.com/#…ic-bearing-balls/=o1ax3l but I still need springs and a loader.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Apr 15, 2004
- Last visit: Jan 13, 2023
- Posts: 358
Posted: Aug 12, 2013 - 03:52 PM
You can get these from mcmaster Carr $8.75 per hundred
http://www.mcmaster.com/#9614k24/=o1ce7d
These are delrin, not "torlon", they have other materials as well including teflon
Much cheaper even if you have to replace them several times
My bad... I didn't see the previous post already had the mcmaster link
Edited by tnell on Aug 12, 2013 - 06:04 PM.
--
Tim
Collierville (Memphis), TN
Supercat 15--sold :(
Hobie monocat--given
Vanguard 15--traded for...
Nacra 4.5--sold
Nacra 5.7
Hobie 14–sold to make room for...
Supercat 17–sold
-- -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Sep 25, 2024
- Posts: 866
Posted: Aug 12, 2013 - 04:53 PM
Ron,
I can mail you my loader. I can get it back at Juana's
--
Philip
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Aug 12, 2013 - 05:58 PM
Thanks Philip, but Gray has a car that needs a home so he can ditch an old beat up rear beam.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Aug 12, 2013 - 07:47 PM
Ron, try the place I got my bearings from when I rebuilt a HArken furler. They had lots in stock, & mailed them quick. Andrew told me about them
http://www.thebeachcats.c…ictures/?g2_itemId=72563
Tim, delrin are cheap, I think the furler bearings were less than 10 cents, torlon were 30 cents.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.