The boat was on a beach mooring on Barnegat bay - when the hurricane came (the year before Sandy) the boat was banged into a wench on the mooring post and eventually got hung up on it.
A fiberglass guy is saying $600 to fix - does that sound good?
--
Rob Jones
1976 Yellow p-16 - parts is parts - hulls cut up
1978 Yellow p-16 - in good working order
1979 White p-15 - parts is parts - hulls cut up
1985 White p-15 - good working order
1982 White NACRA 5.8 - project boat.
1986 White p-16 - in good working order
1975 White Hobie 3.5 - PM me if you want it
--
NACRA 5.8 - large hole repair (looking for techniques/advice)
-
- Rank: Lubber
- Registered: Jun 18, 2007
- Last visit: Aug 22, 2017
- Posts: 95
Posted: Sep 21, 2013 - 12:56 PM
-
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Sep 21, 2013 - 01:37 PM
If you have none of the tools/materials it sounds fair, as long as he rebuilds the tubes, & gelcotes. $600 doesn't buy much labor nowadays.
You could buy the materials required,(& have enough left over to do it again) for not much more than $100.
I guess it comes down to how much you value your time, what your abilities are, & how important cosmetics are to you.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Sep 21, 2013 - 08:24 PM
If done right, $600 is most likely fair.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Lubber
- Registered: Jun 18, 2007
- Last visit: Aug 22, 2017
- Posts: 95
Posted: Sep 22, 2013 - 01:05 PM
done right seems to have many different meanings. I let the guy take the boat - says he'll have it back tuesday. I will post pictures
--
Rob Jones
1976 Yellow p-16 - parts is parts - hulls cut up
1978 Yellow p-16 - in good working order
1979 White p-15 - parts is parts - hulls cut up
1985 White p-15 - good working order
1982 White NACRA 5.8 - project boat.
1986 White p-16 - in good working order
1975 White Hobie 3.5 - PM me if you want it
-- -
- Rank: Lubber
- Registered: Jun 18, 2007
- Last visit: Aug 22, 2017
- Posts: 95
Posted: Sep 24, 2013 - 05:44 PM
I love DIY but with work and 5 kids....
The boat is done already! The dude does want me to pay him to gelcoat the whole boat next - not sure if that's what I want to do though. F
After:
before:
--
Rob Jones
1976 Yellow p-16 - parts is parts - hulls cut up
1978 Yellow p-16 - in good working order
1979 White p-15 - parts is parts - hulls cut up
1985 White p-15 - good working order
1982 White NACRA 5.8 - project boat.
1986 White p-16 - in good working order
1975 White Hobie 3.5 - PM me if you want it
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Sep 24, 2013 - 06:47 PM
That's an impressive turn around.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Lubber
- Registered: Jun 18, 2007
- Last visit: Aug 22, 2017
- Posts: 95
Posted: Sep 25, 2013 - 06:18 AM
He picked it up and dropped it off too. Guarantees his work for one year.
We had a beer when he dropped the boat off last night - really nice guy. Wants to gelcoat the Nacra - I'm going to buff it and sail it long before I go that route.
Here's his websire http:// http://www.fiberglassandboatrepair.com/
Edited by rwj0j0 on Sep 25, 2013 - 07:19 AM.
--
Rob Jones
1976 Yellow p-16 - parts is parts - hulls cut up
1978 Yellow p-16 - in good working order
1979 White p-15 - parts is parts - hulls cut up
1985 White p-15 - good working order
1982 White NACRA 5.8 - project boat.
1986 White p-16 - in good working order
1975 White Hobie 3.5 - PM me if you want it
--
