my custom tarp.
http://utahsummersailing.…reparing-for-winter.html
my home made "custom" tarp
-
- Rank: Lubber
- Registered: Mar 16, 2011
- Last visit: Jul 09, 2014
- Posts: 19
Posted: Sep 28, 2013 - 09:00 PM
-
- Rank: Mate
- Registered: May 31, 2011
- Last visit: Dec 17, 2023
- Posts: 126
Posted: Sep 29, 2013 - 06:21 AM
It looks like a nice job. How many hours labor do you estimate?
You should consider adding holes in the top of the tarp area to allow water to drain. I had a problem with my Hobie brand tarp collecting water, to which Hobie replied that other customers have crushed their hulls due to the collected water weight (same with snow). If the holes are placed right, they would not cause any UV exposure and would drain water onto the ground, and not the tramp.
It looks good.
--
Ted
Hobie 16
South Carolina Lake sailing
-- -
- Rank: Lubber
- Registered: Mar 16, 2011
- Last visit: Jul 09, 2014
- Posts: 19
Posted: Sep 29, 2013 - 09:20 AM
It only took about an hour, also I did add drain holes, thanks. -
- Rank: Lubber
- Registered: Aug 06, 2009
- Last visit: May 23, 2014
- Posts: 21
Posted: Sep 30, 2013 - 07:02 AM
I'd place a PVC bucket or some other device in under the middle of the tarp to raise it up some... otherwise water will pool on the tarp and sit there until it leaks through.
--
rgranger
Smith Mountain Lake, VA
Hobie16, Balboa26, Rhodes 22, O'Brian Windsurfer
-- -
- Rank: Lubber
- Registered: Mar 16, 2011
- Last visit: Jul 09, 2014
- Posts: 19
Posted: Sep 30, 2013 - 08:44 AM
It has drain holes in the center of each section to prevent water from pooling. -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Sep 30, 2013 - 10:01 AM
Strong work, Kevin!
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.