i have a question for you all: what holds the screw that secures the forestay bridle tang on a hobie 14? i would like to install a crosspiece between the hulls. does anybody here know about this?
thanks
jon
--
FOILCAT
--
bridle tang on hobie 14
-
- Rank: Lubber
- Registered: Aug 11, 2013
- Last visit: Oct 28, 2013
- Posts: 11
Posted: Oct 01, 2013 - 12:58 PM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Oct 08, 2013 - 11:16 AM
I'm not sure what you are asking? The bridle is attached to a hole in the Hobie 14 deck lip, which is solid fiberglass right there.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Aug 01, 2002
- Last visit: Nov 26, 2024
- Posts: 426
Posted: Oct 08, 2013 - 01:22 PM
Damon: I think the newer 14 bow tangs are as you describe (like the 16), but the older ones like mine are a eyestrap thingy with four screws sort of in the middle of the front part of the bow.
jon: According to this thread, there's a backing plate in there:
http://www.hobiecat.com/forums/viewtopic.php?f=17&t=6077&p=27662&hilit=bow+tang#p27662
They encourage you to keep a couple of the screws in at all times so that, if it's loose, it doesn't fall off inside the hull!
--
Jerome Vaughan
Hobie 16
Clinton, Mississippi
-- -
- Rank: Lubber
- Registered: Aug 11, 2013
- Last visit: Oct 28, 2013
- Posts: 11
Posted: Oct 28, 2013 - 06:11 AM
thanks rattlehum
mine has a single bolt holding the tang. there are no missing bolts. i guess that the backing plate is similar.
boat progressing along fine. winter is almost here.
jon
--
FOILCAT
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.