TRAC-14 jib bridle specs
-
- Rank: Lubber
- Registered: Oct 06, 2013
- Last visit: Oct 06, 2013
- Posts: 1
Posted: Oct 06, 2013 - 04:22 PM
Newbie with a TRAC-14 in need of a tune-up. It has no rigging for the jib bridle or furler. Looking for the length of stays for the factory jib bridle so i can order some replacements. Would also like some recommendations for a suitable furler. And the covers for the storage compartments are toasted - can they be replaced? -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Oct 07, 2013 - 07:25 AM
If you are going to put a furler on, you probably need to shorten your forestay 5" to makle up for the length of the upper swivel & lower furling drum. A HArken 435 furler is fine for all but the biggest Beachcats.
I think the Trac 14 is also a WIndrush. Try Googling Trac 14. This thread has a manual. PM Catsailor Mike, he might be able to put you in contact with his friends who own one.
http://www.thebeachcats.c…ms/viewtopic/topic/11511
Dan Berger had some parts for sale last year, give him a call, if he doesn't have anything, he might know someone who does.
http://www.thebeachcats.c…73-trac-14-steering.html
Try PM to these guys
http://www.thebeachcats.c…ms/viewtopic/topic/14521
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.