I'm the owner of sailboxes.com and currently manufacture fiberglass sailboxes and hull cradles. I was wondering if anyone is in need of a rear fiberglass mast cradle. I'm in the process of making one for my AHPC C2 and was thinking about making a mold to sell them. I made the plug from my C2, but just sold my Hobie Tiger and checked to see if it fits and it did. I'm thinking that it will prolly fit the Nacra 20's and Infusions too. Let me know what y'all think.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
--
Fiberglass rear mast cradles?
-
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 11, 2013 - 05:39 PM
-
- Rank: Lubber
- Registered: Feb 12, 2010
- Last visit: Feb 18, 2016
- Posts: 77
Posted: Nov 12, 2013 - 06:08 AM
I could use one for my 04 Nacra 570 but I'm thinking my beam may be different than what you are fitting?
--
Steve - Texas Gulf Coast
91 Mystere 5.0 (sold)
04 Nacra 570 (sold)
08 Hobie Wave
00 Taipan 4.9
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Nov 12, 2013 - 06:44 AM
cost?
Photos? -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 12, 2013 - 03:15 PM
Here's a pic of the plug, not finished yet, but the cradle will look just like the pic, but will be a smooth white gelcoat finish, I'm thinking $89 plus shipping and handling.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 12, 2013 - 03:17 PM
Another pic.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Nov 12, 2013 - 03:42 PM
Looks very interesting. I have a rear stand, though, for my trailer so don't count me in. Good luck!
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Jul 20, 2011
- Last visit: Apr 07, 2019
- Posts: 323
Posted: Nov 12, 2013 - 09:29 PM
I'd be interested in a forward mast holder that bolts to a standard trailer via a U bolt ect. I see a lot of misc worn out metal U's, bow stop V's.
Tim
--
Tim Grover
1996 Hobie Miracle 20
Two Hobie 14's
1983 G-Cat Restored
Memphis TN / North Mississippi
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 13, 2013 - 06:19 AM
It's funny you mentioned the front cradle. I started making the plug for it yesterday. Will post a pic when I finish it. I'm thinking it will fit inside the 2" square tubing, that way people could cut the old metal V off and insert the new cradle then bolt it on.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Nov 13, 2013 - 07:27 AM
I just bought a bow stop V for this, b/c my current setup mars the mast. I'm interested to see what you come up with here.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 13, 2013 - 10:22 AM
It will be a fiberglass cradle lined with 20 oz. marine carpet, so it won't scratch the mast.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Apr 27, 2011
- Last visit: Dec 13, 2022
- Posts: 163
Posted: Nov 13, 2013 - 03:41 PM
For some reason, the pics don't load for me, but I have interest - depending on how they're constructed.
--
Jeff R
'88 H18 "Jolly Mon"
'10 C2 USA1193
NE IN / SE MI
cramsailing.com
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 16, 2013 - 11:19 AM
Finally figured out how to upload pics to post on the site. Sorry bout the previous postings.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 23, 2013 - 07:31 AM
Plug is 95% complete, just have to sand a bit more, then make the mold.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Nov 23, 2013 - 07:33 AM
Another view
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Lubber
- Registered: May 29, 2010
- Last visit: Jun 11, 2016
- Posts: 24
Posted: Nov 23, 2013 - 07:56 AM
Kenny makes really nice products. I used his cradles for my N20 (pivoting in the rear and static in the front) and could not have been more pleased. Excellent build quality and better design than the other options on the market. -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Dec 10, 2013 - 08:50 AM
Finally finished the mold...now I just have to wet sand and polish
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Dec 10, 2013 - 09:25 AM
Edited by KennyB on Dec 10, 2013 - 01:30 PM.
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
-- -
- Rank: Lubber
- Registered: Oct 08, 2002
- Last visit: Dec 26, 2014
- Posts: 18
Posted: Dec 10, 2013 - 11:16 AM
no pics Kenny??? Don't show up here.....Can get a pic on the link to the 1st one.
Edited by Robbie on Dec 10, 2013 - 11:17 AM.
--
Robbo
Wave#1181
Capricorn#86
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Dec 10, 2013 - 02:46 PM
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Nov 16, 2002
- Last visit: Jul 04, 2020
- Posts: 139
Posted: Dec 10, 2013 - 03:26 PM
Thanks Yurdle...maybe one day I'll master the pic thing on this site...lol
--
Kenny Boudreaux
2010 C2 F18 USA 323
Goodall Design "Southern Area Rep"
Owner of Sailboxes.com
--
