SC 17 Rudder Attachment Pins
-
- Rank: Lubber
- Registered: Sep 17, 2013
- Last visit: Nov 24, 2013
- Posts: 7
Posted: Nov 11, 2013 - 08:48 PM
I recently purchased an SC17. The pins that attach the rudder to the aluminum bracket on the stern are tubular with cotter pins at the top and bottom. I would like something that is a little easier to remove for trailering and storage. Is there another option that makes rudder removal easier? I would add a photo to this post but could not figure out how to do that. Any help on how to attach a photo would be helpful too. Thanks! -
- Rank: Lubber
- Registered: Jul 04, 2004
- Last visit: Sep 29, 2020
- Posts: 26
Posted: Nov 11, 2013 - 09:03 PM
I have large avibank pins in mine... No photos as I am out of town, but just think large pins like this:
http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=99926&catalogId=10001&langId=-1&storeId=11151&storeNum=50045&subdeptNum=50046&classNum=50056#.UoGo-fnbPX4
4 of them that large are going to get pretty expensive though
Ernie
--
Ernie Kamp
http://www.youtube.com/user/TopSpin80#g/u
Richmond / Livingston / Galveston / Kemah / Texas City, Texas
Supercat 19 and Blade F16 "Nauti Habit", 2 Sunfish
-- -
- Rank: Mate
- Registered: Oct 31, 2010
- Last visit: Oct 24, 2024
- Posts: 195
Posted: Nov 12, 2013 - 03:47 AM
The latest pins Aquarius sells are really easy to remove. Call them and order some, nice to have backups if the gudgeon pins break. I can post a picture later.
--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Nov 12, 2013 - 05:06 AM
Adding photos is explained in the FAQ's, here is the link.
http://www.thebeachcats.c…ew/Main/Photo%20Gallery/
Basically the photo must reside somewhere on the web.They can be on any website, or you can start an album, upload them to your album, then link them. Notice the 2 rows of buttons, (just above the emoticons) when you are typing a post? Use those, IMAGE will allow you to past the image so it shows in the post, URL allows you to paste a copied link so it will be live.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Oct 31, 2010
- Last visit: Oct 24, 2024
- Posts: 195
Posted: Nov 12, 2013 - 05:38 AM
Here's a picture of the current offering of gudgeon pin and cotter pin. It looks funky but is quite easy to pull. Make sure you gudgeon pins aren't metal, they are supposed to be a sacrificial breaking point to save your transoms/rudders. Every old SC I've bought has had metal pins or ss bolts and nuts.
--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
-- -
- Rank: Lubber
- Registered: Jul 04, 2004
- Last visit: Sep 29, 2020
- Posts: 26
Posted: Nov 12, 2013 - 10:03 AM
Mac,
I use the stainless pins in the transom and plastic small bolts for the pivot pins. The pivot pin is so small and much easier to break. To me the two large plastic pins on the transom may have enough strength to break the transom or at least damage it. The plastic bolt as the pin through the rudder to rotate on is pretty easy to break and the large avibanks make it a breeze to pull the rudders on and off. I'm in Korea now, when I get home I'll take a picture.
how long does it take to wear out a set of the "new" pins?
Ernie
--
Ernie Kamp
http://www.youtube.com/user/TopSpin80#g/u
Richmond / Livingston / Galveston / Kemah / Texas City, Texas
Supercat 19 and Blade F16 "Nauti Habit", 2 Sunfish
-- -
- Rank: Mate
- Registered: Oct 31, 2010
- Last visit: Oct 24, 2024
- Posts: 195
Posted: Nov 12, 2013 - 02:37 PM
I don't know how long it takes as I usually sell the boat and move on to another project. I'm trying to fix that. Aquarius seemed pretty adamant about the whole system being plastic, gudgeon pins and roller pins, so I'm really just parroting what Tom told me.
--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Nov 13, 2013 - 10:44 AM
Welcome to TheBeachcats.com!
Instructions for uploading photos and adding them to a forum post are linked in my signature below.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Lubber
- Registered: Sep 17, 2013
- Last visit: Nov 24, 2013
- Posts: 7
Posted: Nov 16, 2013 - 10:39 AM
Thanks to all for the advice. My SC17 has the plastic bolts through the rudder pivots and I agree with Ernie that these would shear off before the larger bolts in the transom mount. I like the idea of the Avibank pins.
Thanks
Ward
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.