Any suggestions
--
Kenneth Purdy
Hobie 16
Nacra 5.2 (2)
Banshee
First Coast, Florida
--
Hobie 14 Roller Furler outer shell broken off
-
- Rank: Mate
- Registered: Aug 16, 2011
- Last visit: Jun 03, 2022
- Posts: 224
Posted: Dec 01, 2013 - 07:31 AM
These things are kind of expensive, I was thinking about wrapping a couple of layers of resin soaked fiberglass cloth all the way round. Maybe with a washer embedded for the line to go through.
Any suggestions
--
Kenneth Purdy
Hobie 16
Nacra 5.2 (2)
Banshee
First Coast, Florida
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Dec 01, 2013 - 08:54 AM
Murrays 50-61960001 spool & housing $8.79 Pete -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Dec 01, 2013 - 09:49 AM
Ken, go to your local Hobie dealer, they will have, or can get them, save you the shipping costs. Even here in Canada they are only $8.99
You can buy all the parts, bearings, etc for those furlers. They are very easy to take apart. I would pull it apart & see if the bearings/cage are corroded & fix everything in one shot.
Edited by Edchris177 on Dec 01, 2013 - 09:55 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Dec 01, 2013 - 01:08 PM
I agree, change out the housing. It's pretty easy and inexpensive. While you're at it, inspect the bushings and the stainless steel yoke (where the bridles connect) as these can crack.
There is an exploded view of the furler assembly at the end of the H18 assembly manual....
http://static.hobiecat.co…sets/H18%26SX_Manual.pdf
And an instructional Youtube video as well....
http://www.youtube.com/watch?v=OhrzlrgVEBk
sm -
- Rank: Mate
- Registered: Aug 16, 2011
- Last visit: Jun 03, 2022
- Posts: 224
Posted: Dec 01, 2013 - 05:19 PM
Thanks all.
--
Kenneth Purdy
Hobie 16
Nacra 5.2 (2)
Banshee
First Coast, Florida
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Dec 08, 2013 - 10:43 AM
Ken, your post inspired me to get off my butt & rebuild a Hobie 18 furler that the scoundrel HULLFLYER assured me was in "great" shape.
I took a few photos & put them here;
http://www.thebeachcats.c…ctures/?g2_itemId=106757
I'm sure you have dealers for the parts, here is a Canadian site that I got mine from. They show all the part #'s.
The bearings are a 616xxxxx part #, so they are back a page. The site is ordered numerically, the parts you require are about pg 48. If I type "Hobie Furler" into the search box, I get all the results, but the page won't link in this post, it only brings you to a generic search.
I didn't know that the casing you require, along with the drum can be purchased together for only $9.
http://shop.foghmarine.co…all-hobie/2,292,793.html
Edited by Edchris177 on Dec 08, 2013 - 10:59 AM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Aug 16, 2011
- Last visit: Jun 03, 2022
- Posts: 224
Posted: Dec 09, 2013 - 09:32 AM
Thanks Edchris, pete and dogboy, I was able to buy the parts I needed for $20 shipped, and am the proud owner of a rebuilt roller furler. I did like your pictures and documentary though. This was my only winter project so I guess I will just go sailing.
Edited by klppurdy on Dec 09, 2013 - 09:33 AM.
--
Kenneth Purdy
Hobie 16
Nacra 5.2 (2)
Banshee
First Coast, Florida
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.