Thanks!
--
Bill
Nacra 5.5 SL
Redondo Beach, CA
--
Nacra torque spec.
-
- Rank: Lubber
- Registered: Aug 20, 2012
- Last visit: Jan 29, 2014
- Posts: 48
Posted: Dec 14, 2013 - 01:25 PM
I've searched around but can't find the torque spec. for the bolt that holds the front crossbeam to my N 5.5, not the straps that secure it on top. I found references to the strap bolts that say between 16-18 lbs., but not for the bolt inside the crossbeam. When I was unscrewing it, it felt like a LOT more than 18 lbs.
Thanks!
--
Bill
Nacra 5.5 SL
Redondo Beach, CA
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Dec 14, 2013 - 03:09 PM
I don't think there are any. I always torqued mine to 16-18 lbs just like the straps.
The purpose of it is so that the main beam does not rotate. This took the place of using the pipe down the middle of the tramp like on the 5.2. On the 5.2, when people removed the pipe, many just popped a rivet
thru the strap and the beam.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.