What's a good low stretch line for a Prindle up and down haul. The line I am using now is too thick and stretchy for sure.
What about the main? My current rope is way to stretchy there too, and pulling the rope taught noticeably makes hoisting the sail more work.
Line for Prindle rudders and main
-
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Feb 09, 2014 - 06:41 AM
-
- Rank: Mate
- Registered: Sep 29, 2012
- Last visit: Jan 10, 2018
- Posts: 441
Posted: Feb 09, 2014 - 12:58 PM
Kenny, call Murrays and ask them for pre-stretch, 8 plait 3/16 line for the Prindle rudders, I tried the 1/4" line and although it works fine, the 3/16 line fits/slides over the rudder sheaves so much better. I think they also have the line end-balls to help with grip when hauling the rudders up, very difficult to obtain the old-style "T" handles, although with minimal effort I'm sure if you went down to your local aluminum dealer, you could get 1/4" aluminum tubing and rig your own "T" handles. You will need 4 X 4' lengths of 3/16 line.
http://www.murrays.com/mm…_Code=C-CO&Store_Code=MS -
- Rank: Mate
- Registered: Sep 29, 2012
- Last visit: Jan 10, 2018
- Posts: 441
Posted: Feb 09, 2014 - 01:01 PM
PS, you can use this same line for your main halyard, but I'm not sure on the length of the halyard line, just ask the techs at Murrays. -
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Posted: Feb 10, 2014 - 06:12 AM
I have my aluminum tube handles and balls, and for sure the current line is almost as big as the hole the downhaul passes through. I think some thinner low stretch line will be a huge upgrade over the clothes line Salty Dog sold me about five years ago. -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Feb 10, 2014 - 09:08 AM
Murrays has a line they call Super Downhaul, I think it's made by Robline. It's tightly woven dyneema and keeps it's round shape. It comes in 3mm. A buddy of mine swears by it on his P16.
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Feb 10, 2014 - 05:37 PM
I use 3/16" stay-set...they last about 2-3 seasons, stretch doesn't seem to be an issue for me. I use 1/4"(stay-set) for my main halyard, it feels more comfortable to pull on than smaller lines. I could use more pricey stuff but no need.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Feb 11, 2014 - 07:19 AM
xls line for the downhaul
i use 7mm robline racing sheet for my main - it is strong, soft, and doesn't absorb water
