How to reattach the dead eye H-18

boudreaux

Rank: Lubber

Registered: May 19, 2013

Last visit: Nov 06, 2015

Posts: 6
Posted: Feb 17, 2014 - 11:04 AM

Rivet holes are elongated approx 9/32" need suggestions to effect repair.

Thanks boudreaux
DamonLinkous

Rank: Administrator

Registered: Jul 19, 2001

Last visit: Oct 31, 2024

Posts: 3445
Posted: Feb 17, 2014 - 01:23 PM

Hello boudreaux and welcome to TheBeachcats.com,

Have you got pictures of the problem? There are instructions in my signature below on how to post them here. I'm assuming you mean that the stainless strap structure that the tail end of the mainsheet/traveler line attaches to behind the rear beam has pulled off the beam?

Those are some hefty rivets so I'm not sure, maybe you will need to fix the beam by welding in a patch and making new holes or it might be easier to find a good condition used beam.

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--
Dogboy

Rank: Mate

Registered: Mar 19, 2004

Last visit: Jul 09, 2024

Posts: 963
Posted: Feb 17, 2014 - 06:40 PM

Drill through to the top of the crossbar using a 7/32" bit and then thru-bolt using #10-24 round head machine screws and a nyloc nut. That's what I did on my boat several years ago and it's been holding up fine. Another option might be to increase the rivet size to 1/4 diameter, but then you would have to increase the diameter of the holes in the dead eye and that might not leave much material remaining. Thru-bolting is probably your best option. I would not weld the crossbar since this would destroy the temper of the aluminum and significantly weaken the crossbar.

sm

Edited by Dogboy on Feb 17, 2014 - 06:43 PM.