Hi,
I just purchased a new tramp for my Nacra 6. I wonder if you can address me to a user manual guide or just give me instructions for how to remove the old tramp and replace it with the new one.
Thanks,
Eric
Replacing Nacra 6 Tramp
-
- Rank: Lubber
- Registered: Feb 18, 2014
- Last visit: Feb 23, 2014
- Posts: 3
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
You have to drop the mast, remove the beam straps on one side of the front beam so you can lift the beam high enough to slide the tramp out -
- Rank: Lubber
- Registered: Feb 18, 2014
- Last visit: Feb 23, 2014
- Posts: 3
-
- Rank: Lubber
- Registered: Nov 11, 2012
- Last visit: Nov 28, 2023
- Posts: 11
There is also a bolt on the inside of the front beam. While you are at it pull all your strap bolts and clean them and lube with teff-gell. You will thank yourself someday.
--
Nacra 6.0na.Sail #111
Nacra 18 Square. Sail #1004
-- -
- Rank: Lubber
- Registered: Feb 18, 2014
- Last visit: Feb 23, 2014
- Posts: 3
Users on-line
This list is based on users active over the last 60 minutes.