Hi,
I just purchased a new tramp for my Nacra 6. I wonder if you can address me to a user manual guide or just give me instructions for how to remove the old tramp and replace it with the new one.
Thanks,
Eric
Replacing Nacra 6 Tramp
-
- Rank: Lubber
- Registered: Feb 18, 2014
- Last visit: Feb 23, 2014
- Posts: 3
Posted: Feb 18, 2014 - 02:58 AM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Feb 18, 2014 - 04:55 AM
You have to drop the mast, remove the beam straps on one side of the front beam so you can lift the beam high enough to slide the tramp out -
- Rank: Lubber
- Registered: Feb 18, 2014
- Last visit: Feb 23, 2014
- Posts: 3
Posted: Feb 18, 2014 - 05:25 AM
Dear Hullflyer,
Thanks for your reply.
Eric -
- Rank: Lubber
- Registered: Nov 11, 2012
- Last visit: Nov 28, 2023
- Posts: 11
Posted: Feb 21, 2014 - 07:58 AM
There is also a bolt on the inside of the front beam. While you are at it pull all your strap bolts and clean them and lube with teff-gell. You will thank yourself someday.
--
Nacra 6.0na.Sail #111
Nacra 18 Square. Sail #1004
-- -
- Rank: Lubber
- Registered: Feb 18, 2014
- Last visit: Feb 23, 2014
- Posts: 3
Posted: Feb 23, 2014 - 02:04 AM
TNX
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.