What are you guys using for channel inserts/nuts when mounting hardware into the mast channel or boom channel. I can't find anything, other than what they call a channel slug, which is like 11 bucks a piece. Pete
--
New Prindle 18-2 Owner
Former Prindle 18 Owner
Multiple Hobie 16s
Boylston Massachusetts
Webster Lake Indian Lake Narragnsett Bay in Rhode Island
--
Channel inserts
-
- Rank: Mate
- Registered: Aug 26, 2013
- Last visit: Apr 13, 2018
- Posts: 151
Posted: Mar 04, 2014 - 05:21 AM
-
- Rank: Mate
- Registered: Aug 15, 2010
- Last visit: Oct 19, 2024
- Posts: 301
Posted: Mar 04, 2014 - 06:16 AM
Could you simple get some round stainless steel rod stock, drill a pilot hole,now a tap hole and than cut it down to size. Don't drill hole too tight for the tap (one size up works the best as long as you have enough thread) and use some Anchor cutting fluid. Anchor is almost like toothpaste in thickness and works well.
When working with stainless steel, tap slowly and back off tap several times to clear tap threads.
Patients is important here.
--
Bill 404 21SE
-- -
- Rank: Mate
- Registered: Aug 15, 2010
- Last visit: Oct 19, 2024
- Posts: 301
Posted: Mar 04, 2014 - 06:25 AM
oh, take a new sanding disc with your grinder to slightly flatten round stock before you drill the pilot hole. It is hard to drill round stock without that small flatten spot .
I build my own rudder pins out of 3/8" round stainless steel stock, maybe that size will work for your new "slugs".
good luck
--
Bill 404 21SE
-- -
- Rank: Mate
- Registered: Aug 26, 2013
- Last visit: Apr 13, 2018
- Posts: 151
Posted: Mar 04, 2014 - 08:28 AM
I was thinking that tapping stainless would be tough. It may be worth a shot. Thx
--
New Prindle 18-2 Owner
Former Prindle 18 Owner
Multiple Hobie 16s
Boylston Massachusetts
Webster Lake Indian Lake Narragnsett Bay in Rhode Island
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Mar 04, 2014 - 09:49 AM
Bill, where do you get your SS stock?
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Aug 01, 2002
- Last visit: Sep 14, 2024
- Posts: 425
Posted: Mar 04, 2014 - 11:33 AM
Maybe I misunderstand the question, but on Hobies square SS nuts are used to attach hardware such as a downhaul cleat in the luff track of the mast.
--
Jerome Vaughan
Hobie 16
Clinton, Mississippi
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Mar 04, 2014 - 04:51 PM
go to http://www.murrays.com/
and search channel insert
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
--
