i am planning on doing this my next days off .
http://www.thebeachcats.com/news/87/catamaran-sailboats-delamination-repair-instructions/
do i need to put a layer of fiberglass over the top of the holes or can i just sand it and paint it , not looking for fancy just want to sail .
--
"take your dreams down from the shelf take the measure of yourself upon a beckoning sea"
eileen quinn
--
fixing soft decks
-
- Rank: Lubber
- Registered: Dec 06, 2013
- Last visit: Nov 26, 2014
- Posts: 33
Posted: Mar 23, 2014 - 11:32 AM
-
- Rank: Mate
- Registered: Jul 20, 2011
- Last visit: Apr 07, 2019
- Posts: 323
Posted: Mar 23, 2014 - 12:09 PM
I've done this repair to a couple H16's including the one I sail a ton. I use slow cure total boat epoxy kit from Jamestown Distributers, once everything is as hard as a rock I level out the drill holes with epoxy putty like marine tex. Sand flush with the deck and you're good to go. Re-gel coat or marine paint to make it look good (optional)
--
Tim Grover
1996 Hobie Miracle 20
Two Hobie 14's
1983 G-Cat Restored
Memphis TN / North Mississippi
-- -
- Rank: Mate
- Registered: Aug 01, 2002
- Last visit: Sep 14, 2024
- Posts: 425
Posted: Mar 23, 2014 - 12:15 PM
No glass needed on holes. Be sure to use the safety stop on the drill bit as directed, and check often to ensure it hasn't slipped so that you don't drill all the way through the deck. (Don't ask!)
--
Jerome Vaughan
Hobie 16
Clinton, Mississippi
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.