I have a critter in my hulls over the winter. It's covers but I leave the plugs out and compartment lids off for ventilation. The critter broke apart the styrofoam that was in there. There were pieces everywhere. I have cleaned it all out. Should I be worried about the foam being gone? Is there a repair option? There are no apparent holes from the critter in the hulls themselves.
Steve
Lost styrofoam in H18 hulls
-
- Rank: Lubber
- Registered: May 24, 2014
- Last visit: May 24, 2014
- Posts: 1
Posted: May 24, 2014 - 07:04 PM
-
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Jul 09, 2024
- Posts: 963
Posted: May 25, 2014 - 04:07 AM
Only if you punch a hole in the boat and start to sink...the purpose of the foam is to provide flotation in the event that the hull is damaged and floods.
Pool noodles would be a reasonable substitute.
sm -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: May 25, 2014 - 02:37 PM
Probably not a big deal. My Nacra 5.2 is fibreglass only, no foam at all.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.