Hi all,
In my excitement to get on the water I left my Aussie pigtail and bow shackle on the tramp and drove off and of course lost the works between home and the lake.
I don't want to wait for an order to get here to Canada so I thought I would get one crimped at our local chandlery. Thing is I don't know the dimensions for this pennant and was wondering if anyone out there knew what the dimensions should be. I think the shorter pigtail should be 6" but don't know for sure. I have no clue what the longer one is.
The boat is an '85 and not modified to my knowledge other than a comp tip.
The pigtail I lost is like this one Murrays p/n 02-3300
Thanks so much for your help.
Cheers,
skydog
Edited by skydog on Jun 04, 2014 - 09:44 AM.
Aussie Jib Pigtail
-
- Rank: Lubber
- Registered: May 08, 2013
- Last visit: Jun 04, 2014
- Posts: 5
-
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Sep 25, 2024
- Posts: 1459
This looks like a Prindle forestay top piece, but Prindles do not have a CompTip- only Hobies.
We need you to clarify what catamaran you have before we can help you.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Lubber
- Registered: May 08, 2013
- Last visit: Jun 04, 2014
- Posts: 5
klozhald,
Can't beleive I missed that detail!
'85 Hobie 16 with an aussie jib conversion and comptip
Cheers,
skydog -
- Rank: Mate
- Registered: May 04, 2014
- Last visit: Mar 03, 2015
- Posts: 138
Where are you in Canada?
I'm in Blind Bay BC..near Salmon Arm/Kamloops
--
1975 P16 "Spring Rain"Sail # 642
Home Built 2004 Optimist-Delta "Unity"
So old it has Dino hide for a sail Chrysler "Pirateer"
Steve
Oyama BC
Lat 50.1167 N
Long 119.3667 W
1700 ft
-- -
- Rank: Lubber
- Registered: May 08, 2013
- Last visit: Jun 04, 2014
- Posts: 5
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.