Nacra 5.2 End Caps :: Catamaran Sailboats at TheBeachcats.com

Nacra 5.2 End Caps

ohmsj

Rank: Mate

Registered: May 07, 2004

Last visit: Nov 14, 2019

Posts: 141
Posted: Jun 06, 2014 - 09:38 PM

So I want to replace the end caps on the N5.2 but since the cost of replacements from Murrays is through the roof, that’s if you can even find them, I decided to make my own. I was going to follow the path that Nacraman57 took, he made very good looking white cap, but ended up with a different design. I found black 3” PVC pipe cap at the HD which has a very think side wall, so I set up a router table to take off just enough material so the cut down piece fits into the beam just perfect. I think I like the way these fit better the factory ones I have.

I posted the setup and end result in the tech section but if you don’t have a router table and would like a set let me know.

http://www.thebeachcats.c…ctures/?g2_itemId=108920

--
Jeff O
N5.0
solcat 18(sold),
N5.2,
H16
Camarillo CA
--
DamonLinkous

Rank: Administrator

Registered: Jul 19, 2001

Last visit: Nov 15, 2024

Posts: 3446
Posted: Jun 07, 2014 - 06:58 PM

Nice work. I edited your pictures to link to the larger versions and added a link to your album so folks could see the details. Thanks for taking time to take pictures and share them with the community!

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--
Edchris177

Rank: Chief

Registered: Nov 26, 2009

Last visit: Aug 10, 2024

Posts: 2531
Posted: Jun 08, 2014 - 07:35 AM

Great solution Jeff.
If you are bored one rainy afternoon, set up your jig & turn out a dozen. There have always been people here looking for end caps.
I'm sure they will sell.

--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--