nacra 450 problem
-
- Rank: Lubber
- Registered: Feb 23, 2014
- Last visit: Oct 21, 2014
- Posts: 6
Posted: Jun 10, 2014 - 02:54 PM
Thank you for your replies but the broblem is not removing the beam but to put it back in place.One of the bolts when i try to screw it back in is loose.I think there is a broblem into the hall.What is going on into the hall?Do i have to open a hole to see the broblem or maybe there is something i can do without cutting the hall.Hope you understant my problem.Thank you. -
- Rank: Lubber
- Registered: Jul 30, 2013
- Last visit: Jan 18, 2015
- Posts: 15
Posted: Jun 18, 2014 - 09:20 AM
Hey Pit!
I had a broken front beam last year with my Nacra 5.7
Ik putted a helicoil into the hull and now the bolt is holding very tight :)
Check the link on youtube!http://www.youtube.com/watch?v=RFYa6sjhh_E
Hope i answered u'r question :)
Grtz
Sander
--
Nacra 5.7 spi 93
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.