Hey,
Bought a 8'6 Cat Trax (http://www.murrays.com/13-1401.html) to use with my Prindle 16.
Looks like it's the wrong size for the prindle? The Catamaran rubs both tires, hence no movement...Am I doing something wrong? I guess I can drill new holes on the dolly and mount the tires closer together.
Thanks.
Wrong Cat Trax?
-
- Rank: Lubber
- Registered: May 05, 2014
- Last visit: Jun 17, 2014
- Posts: 10
Posted: Jun 11, 2014 - 03:24 PM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jun 11, 2014 - 04:29 PM
according to the description there should be a second hole for 8' beams
"Cat Trax axles are available in 8' or 8'6" lengths and the appropriate axle length for your boat will be shipped. The longer 8'6", 2" outside diameter, anodized aluminum axle is double-drilled to accommodate either 8' or 8'6" wide cats." -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jun 12, 2014 - 01:32 PM
If there is not other holes I would just adjust to where you need them mark off and drill new holes. Mine just barely ride inside the inner lip of the hull when I have them sitting across the front top of my hulls just behind where the bridle attach on my P18.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Lubber
- Registered: May 05, 2014
- Last visit: Jun 17, 2014
- Posts: 10
Posted: Jun 14, 2014 - 12:01 PM
Yup, no other holes...had to drill some new ones, took 10 minutes and now good to go!
thanks guy.
