Hi....new to the forum....any ideas how to straighten a slightly bent Hobie 18 mast?
Bent about 2" from the shroud connection to the top.
Ray
Bent Mast
-
- Rank: Lubber
- Registered: Jul 04, 2014
- Last visit: Jul 04, 2014
- Posts: 1
Posted: Jul 04, 2014 - 07:08 AM
-
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jul 04, 2014 - 07:48 AM
If you can't straighten it, I have masts & can ship. See my ad under classifieds---parts. Pete -
- Rank: Lubber
- Registered: Jul 08, 2005
- Last visit: Aug 26, 2023
- Posts: 97
Posted: Jul 07, 2014 - 09:10 AM
if it's a comp tip, i doubt it can be done. however i have had mixed results by laying the mast on the sand at our beach and carefully applying pressure to straighten it. have more than 2 people to help if you can that way one person can keep an eye on progress. be very careful tho as i said, mixed results...some good...some not so good
--
Mike Conway
H16
Hilton, NY
-- -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jul 08, 2014 - 06:00 AM
I have a H=18 solid alum mast (non comp tip) straight as can be $100 local pickup only Delray Beach, Florida -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Jul 08, 2014 - 08:27 AM
Ray, check your PM,(private messages).
Log in, then click on PM, at the top left of the screen.
Pete Begle will give you a fair deal if it turns out you need a new mast.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Apr 06, 2008
- Last visit: Aug 23, 2023
- Posts: 192
Posted: Jul 23, 2014 - 05:10 PM
years ago bent prindle 16 mast in the surf, found 2 telephone poles approx 2 feet apart, sailing buddy joe kept hitting bend spot(same spot u described) with hammer warming up aluminum, then we both applied pressure on the mast between the poles at bend spot, the mast straightened out and we used it till we located a replacement, a friend still uses mast on his hobie 16! go figure. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Jul 23, 2014 - 05:51 PM
how bent is it? if it is slight, it may be fine to sail
the boat can handle to slight variations as long as the bend is not severe and in a high load area and the difference of a "slight bend" may not be perceivable
Users on-line
This list is based on users active over the last 60 minutes.