Welcome anonymous guest

Please Support
TheBeachcats.com

Damaged prindle 16. Hull separation question.  Bottom

  • dflorez

    Lubber
    • Rank: Lubber
    • Registered: Jul 25, 2014
    • Last visit: Oct 23, 2014
    • Posts: 2
    Link to this post Posted: Jul 27, 2014 - 04:17 PM
    http://florezphotography.smugmug.com/photos/i-VwHhbx5/0/XL/i-VwHhbx5-XL.jpg

    Recently purchased a Prindle at what I think was a great price. Unfortunately one of the previous owners did a really rough and barely functional repair - that I removed yesterday. Afterwards, got an idea of the damage he attempted to fix. I'm fairly new to the boating world, though not unfamiliar with fiberglass work. I'm hoping someone has repaired similar damage, or could at least point me in the right direction.

    Here's what they did on the other side... I'm not exactly sure what it is... http://florezphotography.smugmug.com/photos/i-jsvCKGK/0/XL/i-jsvCKGK-XL.jpg

    Also, inside the damaged hull are a few foam blocks http://florezphotography.smugmug.com/photos/i-xkJqfTf/0/XL/i-xkJqfTf-XL.jpg Any idea what their function might've been?

    Any and all information is greatly greatly appreciated.
  • PIRATE39
    PIRATE39
    Mate
    • Rank: Mate
    • Registered: Jul 26, 2008
    • Last visit: Jan 15, 2018
    • Posts: 101
    Link to this post Posted: Jul 27, 2014 - 04:35 PM
    It would be cheaper getting another hull . There are plenty of them around. Doug

    --
    Doug Klem
    Pensacola , Fl.
    Blade F16
    Prindle 18-2 w/spin
    Prindle 18-2 x 3
    Prindle 19 MX
    --
  • Dogboy

    Mate
    • Rank: Mate
    • Registered: Mar 19, 2004
    • Last visit: Nov 21, 2024
    • Posts: 964
    Link to this post Posted: Jul 27, 2014 - 07:49 PM
    Scrapping the hull and getting a replacement one would definitely be the easiest route if that is an option. Repairing this hull is going to be quite involved, especially because you're going to have to un-do the previous "repair" before you even start.

    You will basically need to re-connect the hull side wall to the deck. I think the majority of the glass will be added to the inside of the hull, but you will probably also want to added some glass to the outside of the hull. Dealing with the existing hull/deck joint is going to be a pain. Here is a link to a post I put up on the Hobie forum describing deck seam reinforcement I did on my Hobie 18. This may be helpful. I think you would have to basically do the same thing but to an even greater extent.

    Keep in mind that the hull/deck seam is critical to the hull's strength, especially right at the front crossbar connection. The failed seam could easily allow the hull to collapse and snap off the bow.

    http://www.hobiecat.com/f…ewtopic.php?f=13&t=49780

    sm

No HTML tags allowed (except inside [code][/code] tags)

  • Options

Users on-line

This list is based on users active over the last 60 minutes.

Search The Beachcats

<<  November 2024  >>
  S M T W T F S
> 27 28 29 30 31 1 2
> 3 4 5 6 7 8 9
> 10 11 12 13 14 15 16
> 17 18 19 20 21 22 23
> 24 25 26 27 28 29 30

[Add New Beachcat Event]

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.
[Create New]   [Search]