• mgoltsman
  
  

  • Rank: Lubber
  • Registered: Sep 24, 2013
  • Last visit: Jan 25, 2023
  • Posts: 57

  Posted: Aug 06, 2014 - 11:47 AM

  Checking the rigging of my P16 for deviations from the manual (there were some), I noticed a section in the jib rigging area titled "Jib Sheet and Jam preventer". Needless to say, my boat does not have one of those.
  
  What's worse, I am not at all clear on how to rig it. The manual says take a 7' piece of shock cord, "attach center to the mast and tie each end to the dolphin striker bar on either side of the mast". Where should it attach to the mast so that it does not slide down to the base and become useless? No specifics are given and the picture is completely useless. Similarly, how would I tie it to the dolphin striker bar that it would stay at the sides and keep jib lines from getting caught under the mast rather than slide down to the center of the dolphin striker bar and again become useless?
  
  Any suggestions much appreciated.
  
  --
  Mike
  Prindle 16
  Rochester, NY
  --

  • 
  •  
• Andinista
  
  

  • Rank: Mate
  • Registered: Aug 18, 2003
  • Last visit: Dec 13, 2023
  • Posts: 880

  Posted: Aug 06, 2014 - 12:50 PM

  Like an upside-down "V". At the mast the shock cord can go through the diamond wires (lower end).

  • 
  •  
• mgoltsman
  
  

  • Rank: Lubber
  • Registered: Sep 24, 2013
  • Last visit: Jan 25, 2023
  • Posts: 57

  Posted: Aug 06, 2014 - 01:49 PM

  Diamond wires? What's that? Not sure P16 has it. And still, when jib sheet is pushing down on it while it is trying to get itself jammed under the mast, won't the low end of the inverted V slide all the way down to the center of the dolphin striker bar and let the jib sheet get jammed?
  
  --
  Mike
  Prindle 16
  Rochester, NY
  --

  • 
  •  
• the-renovator
  
  

  • Rank: Mate
  • Registered: Sep 29, 2012
  • Last visit: Jan 10, 2018
  • Posts: 441

  Posted: Aug 06, 2014 - 04:13 PM

  run a bungee from bridle wires connecting shackle to mast just above mast base, make sure your jib lines sweep above bungee, this will stop line from wedging under mast. some sailors use a line/bungee forming an inverted "V" in front of the mast, goes from beam up to bottom of diamond wires back down to opposite side beam.

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: May 22, 2024
  • Posts: 7089

  Posted: Aug 06, 2014 - 09:24 PM

  Quote

  Diamond wires? What's that? Not sure P16 has it

  
  p15 and p16 do not have diamond wires
  
  Diamond wires are steel cables that run up the sides of the mast. they are needed on larger masts to help prevent catastrophic failure of the mast and to give the mast prebend (to optimize sail shape)

  • 
  •  
• Andinista
  
  

  • Rank: Mate
  • Registered: Aug 18, 2003
  • Last visit: Dec 13, 2023
  • Posts: 880

  Posted: Aug 07, 2014 - 06:28 AM

  You can put an eye strap on the mast. The jamming doesn't happen under tension, so it shouldn't slide on the dolphin striker. A clove hitch knot will do. The jamming occurs when the jib sheets touch the mast on each turn. If you wait until the jib is backwinded before changing sheets, chances of jamming are less, as the jib will go quickly to the other side. That will also help with tacking if you have troubles with that. It won't help win regattas though
  
  
  
  Edited by Andinista on Aug 07, 2014 - 06:29 AM.

  • 
  •  
• klozhald
  
  

  • Rank: Chief
  • Registered: Apr 19, 2011
  • Last visit: Nov 20, 2024
  • Posts: 1460

  Posted: Aug 07, 2014 - 12:47 PM

  Wow.
  Use a 7 foot long piece of 1/4" bungee.
  Stand in front of the mast and wrap the middle of the bungee around the mast above the boom gooseneck so that the ends cross in front of the mast.
  Tie the ends to the dolphin striker on each side, making sure they go underneath the jib sheets as they go to the jib, and slide the bungee ends outboard as far as they can go.
  You should now have an upside down V of bungee that will keep the jib lines above and off the mast base and other stuff on the front beam.
  
  --
  Sheet In!
  Bob
  _/)_____/)_/)____/)____/)_____/)/)__________/)__
  Prindle 18-2 #244 "Wakizashi"
  Prindle 16 #3690 "Pegasus" Sold (sigh)
  AZ Multihull Fleet 42 member
  (Way) Past Commodore of Prindle Fleet 14
  Arizona, USA
  --

  • 
  •  
• tblack88
  
  

  • Rank: Lubber
  • Registered: Nov 08, 2020
  • Last visit: Nov 10, 2020
  • Posts: 2

  Posted: Nov 08, 2020 - 09:54 PM

  Could someone post a photo of what this looks like when completed correctly?
  
  --
  Tanner Black
  Prindle 16
  Oklahoma
  --

  • 
  •  
• P.M.
  
  

  • Rank: Mate
  • Registered: Jan 14, 2004
  • Last visit: Sep 25, 2024
  • Posts: 866

  Posted: Nov 09, 2020 - 08:55 AM

  tblack88

  Could someone post a photo of what this looks like when completed correctly?

  
  Click on the image to enlarge and you can see a jib sheet preventer. So easy a caveman can do it . . .
  
  
  --
  Philip
  --

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: May 22, 2024
  • Posts: 7089

  Posted: Nov 09, 2020 - 09:02 AM

  here the line (bungee) is attached to my bridal under my furler (i had a shackle there for rigging a spin)
  
  
  here you can see the see a bungee tied to my bridal that then is tied to my mast
  
  
  
  
  Edited by MN3 on Nov 09, 2020 - 09:08 AM.

  • 
  •  
• tblack88
  
  

  • Rank: Lubber
  • Registered: Nov 08, 2020
  • Last visit: Nov 10, 2020
  • Posts: 2

  Posted: Nov 10, 2020 - 11:42 AM

  P.M.

  tblack88

  Could someone post a photo of what this looks like when completed correctly?

  
  Click on the image to enlarge and you can see a jib sheet preventer. So easy a caveman can do it . . .
  

  
  Thanks! that´s what I had imagined
  
  --
  Tanner Black
  Prindle 16
  Oklahoma
  --

  • 
  •  
• DamonLinkous
  
  

  • Rank: Administrator
  • Registered: Jul 19, 2001
  • Last visit: Nov 15, 2024
  • Posts: 3446

  Posted: Nov 10, 2020 - 02:33 PM

  P.M.

  
  

  
  Nice picture! The original TheBeachcats.com H18 in the background.
  
  --
  Damon Linkous
  1992 Hobie 18
  Memphis, TN
  
  How To Create Your Signature
  
  How To Create Your Own Cool Avatar
  
  How To Display Pictures In The Forums.
  --

  • 
  •  
• P.M.
  
  

  • Rank: Mate
  • Registered: Jan 14, 2004
  • Last visit: Sep 25, 2024
  • Posts: 866

  Posted: Nov 11, 2020 - 11:14 AM

  DamonLinkous

  P.M.

  
  

  
  Nice picture! The original TheBeachcats.com H18 in the background.

  
  . . . and home to the Cat Caper where everyone dressed up for Halloween. I've got pics somewhere
  
  Also founder to the North American series Leukemia Cup Regatta, championed by Stan Wrobel, Gary Jobson and many very deserving others.
  
  --
  Philip
  --

  • 
  •  
•  
•  

Users on-line

• 0 users

This list is based on users active over the last 60 minutes.