As the title says,can anyone with a spin on a 5.8 tell how long the pole is
thanks
Carl
--
Carl
Dart 18x2
Nacra 5.8
Acat
Windrider Rave x2 for sale
--
Nacra 5.8 spin pole lenth
-
- Rank: Mate
- Registered: Oct 24, 2013
- Last visit: Jul 22, 2024
- Posts: 251
-
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Oct 31, 2024
- Posts: 796
When I did do it I used a 12' pole.... In the end, and in my opinion, it was not worth money or time to do it...
I went with a boat that was designed from the start to have one... the hulls on the 5.8 do not have the inner support in the way of bulkheads and stringers to take on the additional stress of the bridle wires you're going to need to do to set this up right...
Edited by JohnES on Oct 17, 2014 - 08:22 AM.
--
John Schwartz
Ventura, CA
-- -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Oct 31, 2024
- Posts: 796
Oh! One other thing.... if you do make the upgrade, change out your diamond wires from 1/8th inch to 5/32 inch.....
Your mast will thank you later.
--
John Schwartz
Ventura, CA
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
I would say most boats 5.5 to 6 meters use the torndao sized pole which is 13' 2"
most use either 1.5" or 2" OD pole
Edited by MN3 on Oct 18, 2014 - 08:05 AM. -
- Rank: Mate
- Registered: Oct 24, 2013
- Last visit: Jul 22, 2024
- Posts: 251
Thanks for the replies guys i have been given a f18 spin, launcher and a windsurfer mast, nobody has seen fit to give me a I20 yet!!!
--
Carl
Dart 18x2
Nacra 5.8
Acat
Windrider Rave x2 for sale
-- -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Oct 31, 2024
- Posts: 796
Check the classifieds.... prices on the I20 are coming down......
--
John Schwartz
Ventura, CA
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.