Thanks much, Eric
--
81' P16 square top
--
Hi folks, need a P16 Tiller Crossbar
-
- Rank: Lubber
- Registered: Oct 27, 2014
- Last visit: Oct 28, 2014
- Posts: 3
Posted: Oct 27, 2014 - 10:52 PM
-
- Rank: Lubber
- Registered: Jul 06, 2008
- Last visit: Mar 23, 2016
- Posts: 94
Posted: Oct 27, 2014 - 11:28 PM
for a temp fix use galvanized electrical conduit from the HW store.
--
nacra inter-18
CNBP
-- -
- Rank: Lubber
- Registered: Jul 06, 2008
- Last visit: Mar 23, 2016
- Posts: 94
Posted: Oct 27, 2014 - 11:29 PM
then order aluminum from Grainger or Murrays
--
nacra inter-18
CNBP
-- -
- Rank: Lubber
- Registered: Oct 27, 2014
- Last visit: Oct 28, 2014
- Posts: 3
Posted: Oct 28, 2014 - 06:37 AM
Thanks gents, thats a good idea on Grainger. Crossbar is on order from Murrays….unfortunately w/out cast aluminum end pieces due inside diameter to small. Must cut exactly to fit, no post cut adjustment available. Murrays sez they have not been able to find the right size tube…
--
81' P16 square top
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Oct 28, 2014 - 02:59 PM
a hobie 16 bar works...just have to cut off ~2" and rivet in end caps. pete probably has one.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
--
