Hello all
Does any know if it is possible to clean the mast and cross bars on an 81 Prindle. I dont want to polish it just clean
it and make it look nice. The rest of the boat looks great and I would like the aluminium to look good.
thanks for any help
--
Duane
1981 P18
Simi Valley Ca.
--
mast cleaning
-
- Rank: Lubber
- Registered: Aug 14, 2014
- Last visit: Nov 14, 2014
- Posts: 24
Posted: Nov 11, 2014 - 01:31 PM
-
- Rank: Mate
- Registered: Feb 05, 2011
- Last visit: Jun 15, 2021
- Posts: 575
Posted: Nov 11, 2014 - 03:03 PM
The anodized silver mast on my SC 15 looked pretty shabby. I cleaned it with a ScotchBrite pad and Loctite Aluminum
Jelly. It cleaned up nicely. The directions on the jar say" not recommended for new or anodized surfaces. I put it on and rinsed it off quickly. I found no ill effects.
--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
-- -
- Rank: Lubber
- Registered: Aug 14, 2014
- Last visit: Nov 14, 2014
- Posts: 24
Posted: Nov 14, 2014 - 01:12 PM
Did the scotch brite leave scratch marks on the anodized surface
--
Duane
1981 P18
Simi Valley Ca.
-- -
- Rank: Mate
- Registered: Feb 05, 2011
- Last visit: Jun 15, 2021
- Posts: 575
Posted: Nov 16, 2014 - 04:57 PM
No, I didn't lean on it to hard. It did clean the bare spots nicely.
--
'82 Super Cat 15
Hull #315
Virginia
Previously owned: '70 H14, '79 H16, '68 Sailmaster 26, '85 H14T
--
