Hobie 18

Hobie 18 "Quiet Time" Rebuild

greddawn

Rank: Lubber

Registered: Aug 25, 2014

Last visit: May 26, 2015

Posts: 9
Posted: Mar 23, 2015 - 02:59 PM

A shameless sneak preview of the resurrected Hobie 18 "Quiet Time" Right after we laced up the tramp for the first time. Some work left on it, but framing was a huge mental milestone. Thanks to all on this thread so far....
DamonLinkous

Rank: Administrator

Registered: Jul 19, 2001

Last visit: Nov 15, 2024

Posts: 3446
Posted: Mar 23, 2015 - 07:04 PM

I started this topic so that greddawn's Hobie 18 wouldn't get lost in the long Referbing Hobie 18 Thread topic.

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--
goodsailing

Rank: Mate

Registered: Feb 18, 2013

Last visit: Jul 19, 2015

Posts: 396
Posted: Mar 23, 2015 - 07:19 PM

I gather Hobie 18's are getting a tad long in the tooth that you could start a couple of hundred: Hobie Referb threads. Great going on this one. Hey, if we work hard, we could start a whole fleet of Retro Hobie's. We could all meet at the local put in and show off our redoes like the cars guys do with 60's cars!

--
Goodsailing

Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
--
greddawn

Rank: Lubber

Registered: Aug 25, 2014

Last visit: May 26, 2015

Posts: 9
Posted: May 25, 2015 - 01:40 PM

First sail on Saturday, in Central Texas, Lake Fayette. If anyone caught the news, Central Texas has been flooding due to heavy rains, so we were pessimistic about even being able to sail. Fortunately, we caught a break in the weather during the late afternoon and were able to get out in about 10 knot winds. With so many last minute preparations, I have yet to finish the refurb write up, but now that it's on the water, my weekend evenings are much more free to get it done. So glad that the boat performed perfectly with only a few minor tweaks, and glad to bring a dead hobie back to life.
BrianCT

Rank: Lubber

Registered: Sep 14, 2010

Last visit: Oct 30, 2016

Posts: 58
Posted: May 25, 2015 - 05:06 PM

Beautiful restoration, congratulations!
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: May 22, 2024

Posts: 7089
Posted: May 25, 2015 - 09:00 PM

looks great
goodsailing

Rank: Mate

Registered: Feb 18, 2013

Last visit: Jul 19, 2015

Posts: 396
Posted: May 25, 2015 - 10:41 PM

Looks good. What paint was used for hulls?

--
Goodsailing

Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
--
greddawn

Rank: Lubber

Registered: Aug 25, 2014

Last visit: May 26, 2015

Posts: 9
Posted: May 26, 2015 - 12:01 PM

revolution sm-1000, i think the color was navy or midnight blue, can't recall atm. Has held up perfectly to an absolute beating. Do not clearcoat over it though, turbulent flow caused peeling of the clearcoat. Base coat was not affected
goodsailing

Rank: Mate

Registered: Feb 18, 2013

Last visit: Jul 19, 2015

Posts: 396
Posted: May 26, 2015 - 03:24 PM

What clear coat? Same brand? Might have been a reaction. I've not heard of this brand before. I'm not sure about non-two part paint. I've used interlux perfection on dingy hull bottoms and it's tough as nails. Looks sprayed after roll and tip. Glad its working out for you. I'll be painting my hulls later in the year.

--
Goodsailing

Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
--
greddawn

Rank: Lubber

Registered: Aug 25, 2014

Last visit: May 26, 2015

Posts: 9
Posted: May 26, 2015 - 08:58 PM

The clearcoat was an enamel, I want to say rustoleum. The base coat of the paint was a 2 part epoxy, only the topcoat was single part. Roll and tip method worked great, but took quite a while.