Any reason I should not put an inspect port between the rear beam and the dagger slot?
I know hull has no bulkheads and I replaced the foam billets with pool noodles...(Special use project).
Is a 6-inch contoured port even avail?
--
Leave places better for having been there; respect others,
"The one thing that doesn't abide by majority rule is a person's conscience." Harper Lee - Scout, To Kill a Mockingbird.
Congress needs fixing, fix it!
--
6- or 5-inch contoured inspect port - Hobie 18 ?
-
- Rank: Lubber
- Registered: Jul 03, 2009
- Last visit: Feb 03, 2021
- Posts: 90
Posted: Apr 07, 2015 - 04:01 PM
-
- Rank: Mate
- Registered: Oct 26, 2002
- Last visit: Sep 23, 2019
- Posts: 390
Posted: Apr 07, 2015 - 08:58 PM
Bob,
Check with Murray's Marine, not sure about 6". And I'll check my stash, I know I bought a pair recently for the SC that were bigger than I needed.
Dave -
- Rank: Mate
- Registered: Oct 24, 2013
- Last visit: Jul 22, 2024
- Posts: 251
Posted: Apr 08, 2015 - 10:11 AM
6 inch contoured are kinda hard to find,I installed a 4 inch curved in the place you are talking about on the p19 . I bought the 6 inch flat for the B-LION and bedded them on a bed of thickened resin,looks good.
http://www.saltydogmarine.com/index.php?cPath=54&osCsid=f9b4468d37817f91eaff7d8b43800406
Edited by onekiwi on Apr 08, 2015 - 10:14 AM.
--
Carl
Dart 18x2
Nacra 5.8
Acat
Windrider Rave x2 for sale
-- -
- Rank: Mate
- Registered: Apr 24, 2005
- Last visit: Apr 18, 2023
- Posts: 709
Posted: Apr 08, 2015 - 06:43 PM
I put inspection ports in between the rudder and rear beam. I avoided in front of the rear beam Since I would be sitting on them while sailing, and that didn't sound comfortable. I think my ports are 4" contoured. I used them to repair cracking at the rear crossbar.
--
Scott,
‘92 H18 w/SX wings
‘95 Hobie Funseeker 12 (Holder 12)
‘96/‘01/‘14 Hobie Waves
-- -
- Rank: Lubber
- Registered: Jul 03, 2009
- Last visit: Feb 03, 2021
- Posts: 90
Posted: Apr 09, 2015 - 09:29 AM
Sorry for late response. I check the response box, but emails I did not rec...will check spam and email in CP to be sure.
Anyway, Thanks for help. Onekiwi is right 6" curved are scarce enough I decided 5 inch will do. Hole size only 1/2 inch or so difference...
--
Leave places better for having been there; respect others,
"The one thing that doesn't abide by majority rule is a person's conscience." Harper Lee - Scout, To Kill a Mockingbird.
Congress needs fixing, fix it!
--
