My Prindle 18-2 has a roller furling and it is attached to the forestay with a turnbuckle. I just can't get the negative thoughts out of my head regarding the turnbuckle unthreading one day while the furler is spinning. Am I over thinking this or is a turnbuckle just a bad idea here? Thanks Pete
--
New Prindle 18-2 Owner
Former Prindle 18 Owner
Multiple Hobie 16s
Boylston Massachusetts
Webster Lake Indian Lake Narragnsett Bay in Rhode Island
--
Turnbuckle with a roller furling
-
- Rank: Mate
- Registered: Aug 26, 2013
- Last visit: Apr 13, 2018
- Posts: 151
-
- Rank: Lubber
- Registered: Jul 08, 2005
- Last visit: Aug 26, 2023
- Posts: 97
not good....get a 1/4 inch shackle and be done with the worrying....not even sure the three stooges would use a turnbuckle....just my $.02
--
Mike Conway
H16
Hilton, NY
-- -
- Rank: Mate
- Registered: Aug 11, 2010
- Last visit: Mar 19, 2018
- Posts: 424
No problem at all, just make sure the counter-nuts ( translation ? )
which keep the threaded ends on the turnbuckle in place are tight
and taped with volcanic tape.
Still not able to sleep ? Replace it with something like this.
Grtz, André
--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.
Amsterdam, the Netherlands
-- -
- Rank: Mate
- Registered: Aug 18, 2003
- Last visit: Dec 13, 2023
- Posts: 880
-
- Rank: Mate
- Registered: Aug 26, 2013
- Last visit: Apr 13, 2018
- Posts: 151
Thanks guys.
--
New Prindle 18-2 Owner
Former Prindle 18 Owner
Multiple Hobie 16s
Boylston Massachusetts
Webster Lake Indian Lake Narragnsett Bay in Rhode Island
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Jul 09, 2024
- Posts: 963
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
I believe this is stock for the 18-2 and should not be a problem.
http://www.murrays.com/02-2545-42.html
since you would have to cut off the turnbuckle. you would probably need to replace the entire forestay to change to another system (chainplate or thimbled end) - not a big deal but some Loctite and rigging tape would be cheaper
Edited by MN3 on Apr 20, 2015 - 07:43 AM. -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Oct 31, 2024
- Posts: 3445
HaHa there you go then, never would have guessed what he described was the factory setup.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
--