Hi all,
Working on my SolCat 18 and wondering what the best lacing material is best for the tramp. Has anyone used flat webbing to lace the tramp? I've used it for climbing anchors and enjoy it's strength and versatility but I'm not sure if it's appropriate for a cat tramp.
Question 2 is rudder pins. My boat came with 1/4" stainless carriage bolts with flat washers and nylon lock nuts. Clearly not original but, seemed to work for the previous owner. What is the preferred material for rudder pins and what is the correct size for this boat?
Thanks
Tramp lacing and rudder pins
-
- Rank: Lubber
- Registered: Apr 28, 2015
- Last visit: May 22, 2015
- Posts: 8
Posted: May 22, 2015 - 09:39 PM
-
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: May 22, 2015 - 11:41 PM
Flat webbing lacing should be fine as long as it goes thru the grommets. Factory rudder casting pins were 1/4" x 7" stainless steel with holes top & bottom for split ring or cotter pin. Pete
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.