I riveted two flat washers over the hole and it looks like it will hold for awhile. Typically, how would a sail maker patch this? Tks
--
Goodsailing
Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
--
H18 Cunningham Grommet Corroded and fell out... leaving hole in sail
-
- Rank: Mate
- Registered: Feb 18, 2013
- Last visit: Jul 19, 2015
- Posts: 396
Posted: Jun 10, 2015 - 10:41 PM
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jun 11, 2015 - 12:09 AM
This will solve the issue.
http://www.murrays.com/01-1016.html
Or take it to a sailmaker to have a new grommet put in.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Lubber
- Registered: Apr 10, 2013
- Last visit: Oct 25, 2015
- Posts: 94
Posted: Jun 11, 2015 - 07:28 AM
Take it to an awning/canvas shop or sail making and get a spur grommet installed. Should cost you $5 or less. -
- Rank: Mate
- Registered: Feb 18, 2013
- Last visit: Jul 19, 2015
- Posts: 396
Posted: Jun 11, 2015 - 09:11 AM
Thanks.
--
Goodsailing
Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
-- -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jun 11, 2015 - 10:45 AM
If you put significant down haul on your sail you may find that a normal spur grommet won't hold up for long. My preference would be a riveted plate or a reinforced heavy duty steel grommet that a sailmaker can put in.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Feb 18, 2013
- Last visit: Jul 19, 2015
- Posts: 396
Posted: Jun 11, 2015 - 12:23 PM
I used two 2" by 1/8" thick tsteel washers, drilled holes and rivited both together over hole that was left. It was really tricky getting it together to rivet. I had to use some welding plyers / vice grips to hold it tight to compress everything so that the rivets would set properly. A temporary patch till sail is retired.
--
Goodsailing
Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
-- -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jun 12, 2015 - 12:11 AM
That'll work. You can actually buy washers like predrilled from sailrite for exactly that purpose.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
--
Users on-line
This list is based on users active over the last 60 minutes.